73IP07BK-L - Blackhawk Nylon IWB Holster LH 07 3 1/4"-3 3/4"

BLACKHAWK! Inside-The-Pants Holster

This lightweight holster design lets you carry a variety of pistols and revolvers inside the pants for the utmost in comfort and concealment. It features a rugged clip and a special moisture barrier layer that keeps sweat out while cushioning you against any sharp edges. The BLACKHAWK! Inside-The-Pants Holster features an open top for fast access and is constructed of a four layer laminate with a rugged belt clip. The interior's smooth nylon lining allows for a quick and easy draw while the suede like outer shell anchors holster securely inside your pants. These holsters are right hand draw only but the belt clip allows for use with any standard width pants belt.

Fits:
AMT "Backup" .45
Astra A-70 and A-75
Auto-Ordnance Pitbull
Beretta 8000, 8040, 8045 Cougar and 9000
Colt 1991A1 Compact, Double Eagle Officer's and Officers ACP
EAA F.A.B. 92 and Witness Sub-Compact
Glock 19, 23, 29, 30, 32 and 36
H&K USP Compact P7, P7M8, P7M10 and P7M13
Hi-Point 9mm compact and .380 compact
Khar K9, P9 9mm and K40
Kel-Tec P-11, P32 and P-40
Kimber Ultra Carry, Stainless Steel Ultra Carry and Ultra CDP
Llama Mini-Max and MiniMax II
Para-Ordnance P12.45, OPS and Companion
SIG SAUER P229R, P225, P228, P229, P239, P245, SP2340, and SP2009
S&W 469, 669, 908, 3913, 3914, 3953, 3954, 4013, 4013TSW, 4053, 5903SSV, 5943SSV, 6904, 6906, 6944, 6946, Sigma Compact 9mm and .40S&W
Springfield Armory Commander, P9 Compact and XD
Star Ultrastar and P-88
Steyr M40 and M9
Taurus PT-58, PT-957, PT-908, PT-911, PT-938 and PT-940
Walther P5 and P22

Specifications and features:
Blackhawk inside-the-pants holster
Size 07
Fit s 3-1/4" to 3-3/4" medium and large frame autos
Left hand
Suede-like outer shell
Moisture-barrier layer
Open top
4-layer laminate
Nylon lining
Belt clip
Black

$12.95

47702 - Glock 26 G26 Gen 5 9mm 12rd Extended Magazine

    MANUFACTURER: GLOCK
    FAMILY: G26 Series
    MODEL: G26 Gen 5 Magazine
    TYPE: Accessory-Magazines
    CALIBER/GAUGE: 9mm
    FINISH: Black Polymer
    FINISH TYPE: Black
    CAPACITY: 12 rd.
    ADDL INFO: Fits G26 Gen 5 9MM
    MFG MODEL NO: 47702
    UPC: 764503035876
    WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov

$32.95

MAG556-BLK - Magpul Pmag 30 AR M4 Gen M3 Window 5.56 .223

Magpul Pmag 30 AR M4 Gen M3 Window Magazine 5.56 .223 - The next-generation PMAG 30 GEN M3 Window is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons that features transparent windows to allow rapid visual identification of approximate number of rounds remaining. Along with expanded feature set and compatibility, the GEN M3 Window incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

Similar to the MOE PMAG, the GEN M3 Window features a long-life USGI-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.

In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.

Durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevel™ system provides positive verification without affecting the durability or reliability of the magazine.

Made in U.S.A.

FEATURES

Next-generation impact and crush resistant polymer construction
Modified dimensions allow for wider compatibility with non Colt-spec 'STANAG 4179' platforms
Constant-curve internal geometry for smooth feeding
Anti-tilt, self-lubricating follower for increased reliability
Long life USGI-spec stainless steel spring, black-oxide coated (MIL-DTL-13924D)
Anti-glare translucent MagLevel windows on both sides of the body along with a painted indicator on the spring allows for
easy determination of rounds remaining from 1 to 30
Over-travel insertion stop on the spine
Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
Paint pen dot matrix panels on the bottom of the body to allow for identification marking
Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit

$17.95

110022 - Hoppe's 1-2-3 Done 22 Caliber Pistol Cleaning Kit

Hoppe's, 1-2-3 Done!, Cleaning Kit, 22 Caliber, Pistol Cleaning Kit

Specifications
UPC   026285100228
Manufacturer   Hoppe's
Manufacturer Part #   110022
Model   1-2-3 Done!
Type   Cleaning Kit
Subcategory   Cleaning Kits

$20.95

49322 - Weaver 1" Grand Slam Scope Rings High / Silver

Weaver 1" Grand Slam Top Mount Scope Rings High / Silver - Weaver has re-designed the classic Grand Slam Rings with 4 screws instead of 2 for more positive scope holding power. Grand Slam Rings are constructed of solid steel which yields amazing strength and scope retention. Scope returns to zero upon reinstallation.

CHOOSING RINGS: Ring height is determined by measuring the outside objective (bell) diameter on your scope.

Technical Information
Material: Steel
Style: Weaver (cross-slot)
Ring Height: (measured from base of ring to bottom of scope tube)

1" Medium: .188"
1" High: .332" Fits un to a 44mm OBJ Lens
1" Extra-High: .560"
30mm High: .500"

Notes:
Torx screws and wrench included

$28.99

47463 - Glock 33rd 33 9mm FDE Magazine 26, 17, 19, 34

     FAMILY:G17 Series
     MODEL:G17 / G19 / G26 / G34 Magazine
     TYPE:Accessory-Magazines
     FINISH:FDE (Flat Dark Earth)
     CALIBER/GAUGE:9mm
     CAPACITY:33 rd.
     ADDL INFO:33 rd. Magazine for Glock 9mm
     ADDL INFO:Packaged Magazine

$37.95

73IP00BK-R - Blackhawk Nylon IWB Holster RH 00 2"-3"

BLACKHAWK! Inside-The-Pants Holster

This lightweight holster design lets you carry a variety of pistols and revolvers inside the pants for the utmost in comfort and concealment. It features a rugged clip and a special moisture barrier layer that keeps sweat out while cushioning you against any sharp edges. The BLACKHAWK! Inside-The-Pants Holster features an open top for fast access and is constructed of a four layer laminate with a rugged belt clip. The interior's smooth nylon lining allows for a quick and easy draw while the suede like outer shell anchors holster securely inside your pants. These holsters are right hand draw only but the belt clip allows for use with any standard width pants belt.

Fits:
Astra double action revolvers
Colt Agent, Cobra, Commando, Detective Special, Lawman, DSII and SF-VI
EAA Windicator
H&R 504, 525, 532, 632, 622, 632, 642, 732, 733, 826, 829, 832, 833, 900, 901, 922, 925, 929, 930 and 970
New England Firearms .22 LR and .32 H&R mag
Rossi double action revolvers, 31, 51, 515, 515M, 518, 677, 68, 69, 70, 720, 84, 851, 877, 88, 89, 94, 951, 971, 971VRC, Cyclops, R351, R352, R461 and R462
Ruger Security Six, Service Six, Speed Six and SP101
S&W J-Frame with concealed hammers, 242, 640, 940, K-Frames, 10, 12, 13, 15, 19, 64, 648, 65, 66 and 547
Springfield Armory XD Subcompact and Compact
Taurus 65, 66, 73, 74, 80, 82, 83, 415, 431, 441, 445, 605, 741, 817 and 941

Specifications and features:
Blackhawk inside-the-pants holster
Fits 2" to 3" small-frame double-action revolvers
Right hand
Open top
4-layer laminate
Suede-like outer shell
Moisture-barrier layer
Standard belt clip
Black

$12.95

MAG557-BLK - Magpul Pmag 30 AR15 Gen M3 Magazine 5.56 .223

Magpul Pmag 30 AR / M4 Gen M3 30rd Magazine 5.56 .223 - The next-generation PMAG 30 GEN M3 is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

Similar to the MOE PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.

In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.

Made in U.S.A.

FEATURES
Next-generation impact and crush resistant polymer construction
Modified dimensions allow for wider compatibility with non Colt-spec platforms
Constant-curve internal geometry for smooth feeding
Anti-tilt, self-lubricating follower for increased reliability
Long life USGI-spec stainless steel spring
Over-travel insertion stop on the spine
Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
Paint pen dot matrix panels on the bottom of the body to allow for identification marking
Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit

$14.95

110040 - Hoppe's 1-2-3 Done 40 Caliber Pistol Cleaning Kit

Hoppe's, 1-2-3 Done!, Cleaning Kit, 40 Caliber, 10mm Pistol Cleaning Kit

Specifications
UPC   026285100402
Manufacturer   Hoppe's
Manufacturer Part #   110040
Model   1-2-3 Done!
Type   Cleaning Kit
Subcategory   Cleaning Kits

$20.95

49713 - Weaver 1" See Thru Scope Rings Marlin Lever Action

Weaver 1" See Thru Scope Rings Marlin Lever Action Rifles Black - These rings let you choose between a quick iron sight shot or using the scope. For 1" scope tubes only. No base is required. This mount will position the scope about 7/8" above the receiver. Fits up to a 50mm OBJ Lens.

Technical Information

Material: Aluminum

Style: Integral Mount

Ring Diameter: 1"

Ring Height: Scope is raised 7/8" above receiver to allow use of iron sights.

Fits the following models:

Marlin Lever Actions: Models 9, 36, 45, 62, 93, 336, 375, 444, 1893, 1894 and 1895.
Glenfield 30
Zane Grey

$14.95

COMING SOON

47462 - Glock 33rd 33 9mm OD Green Magazine 26, 17, 19, 34

     FAMILY:G17 Series
     MODEL:G17 / G19 / G26 / G34 Magazine
     TYPE:Accessory-Magazines
     FINISH:O.D. Green
     CALIBER/GAUGE:9mm
     CAPACITY:33 rd.
     ADDL INFO:33 rd. Magazine for Glock 9mm
     ADDL INFO:Packaged Magazine

$37.95

73IP01BK-R - Blackhawk Nylon IWB Holster RH 01 3"-4" Med Auto

Blackhawk Inside-the-Pant Holster 3"-4" Medium-Frame Autos Right Hand Belt Clip Black

This lightweight holster design lets you carry a variety of pistols and revolvers inside the pants for the utmost in comfort and concealment. It features a rugged clip and a special moisture barrier layer that keeps sweat out while cushioning you against any sharp edges. The BLACKHAWK! Inside-The-Pants Holster features an open top for fast access and is constructed of a four layer laminate with a rugged belt clip. The interior s smooth nylon lining allows for a quick and easy draw while the suede like outer shell anchors holster securely inside your pants. These holsters are right hand draw only but the belt clip allows for use with any standard width pants belt.

Features and Specifications:
Manufacturer Number: 73IP01BKR
Blackhawk inside-the-pants holster
Fits 3" to 4" medium-frame semi-automatic handguns
Right hand
Open top
Four-layer laminate
Suede-like outer shell
Moisture-barrier layer
Standard belt clip
Black

Fits:
Astra Constable, Camper and Falcon
Beretta 34, 70S, 81, 82, 82B, 84, 84B, 84F, 85, 85B, 85F, 86, 87, 90, Jaguar and Puma
Bersa Thunder .380 and Series 95
Browning BDA .380
Colt 380 Government, Government Pocketlite and Pocket 9
CZ 83 and 82
EAA European .22, .380 and .32
K.B.I. and FEG PMK-380 and SMC-380
Jennings 48, 9mm 13 shot
Llama XV, XA, 111A and Micro-Max
Makarov
SIG SAUER P230 and P232
S&W 2213, 2214 and Sigma SW380
Star 30PK, Firestar and Firestar Plus
Walther PP, PPK, PPK/S and PP Super

$14.95

MAG233-BLK - Magpul Pmag 40 AR / M4 Gen M3 Mag 5.56 .223

The next-generation PMAG 40 GEN M3 is a 40-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

The PMAG 40 GEN M3 features a long-life stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.

In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.

Made in U.S.A.

FEATURES

Next-generation impact and crush resistant polymer construction
Modified dimensions allow for wider compatibility with non Colt-spec platforms
Constant-curve internal geometry for smooth feeding
Anti-tilt, self-lubricating follower for increased reliability
Long life stainless steel spring
Over-travel insertion stop on the spine
Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
Paint pen dot matrix panels on the bottom of the body to allow for identification marking
Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit

$19.95

110045 - Hoppe's 1-2-3 Done 45 Caliber Pistol Cleaning Kit

Hoppe's, 1-2-3 Done! Cleaning Kit, .45 Cal Pistol, Clam Pack, Includes BoreSnake, Solvent, and Oil

    .45 Cal Pistol
    BoreSnake
    No. 9 Gun Bore Cleaner
    Lubricating Oil

Product Description

Cleaning a firearm has never been faster or easier. Hoppe's new 1-2-3 Done! cleaning kits contains everything needed to cleanse and protect a firearm in three simple steps. Available in nine common calibers, each kit contains Hoppe's legendary No. 9 Gun Bore Cleaner along with the fastest bore cleaning tool on the planet-Hoppe's patented BoreSnake. It also includes a bottle of lubricating oil and easy-to-understand photo directions. Swab the barrel, add a few drops of Hoppe's No. 9 Lubricating Oil and the gun is ready for storage. It really is as easy as 1-2-3.

Specifications
UPC   026285100457
Manufacturer   Hoppe's
Manufacturer Part #   110045
Model   Cleaning Kit
Model   1-2-3 Done!
Type   Cleaning Kit
Fit   45
Packaging   Clam Pack
Subcategory   Cleaning Kits

$20.95

COMING SOON

49161 - Weaver 1" Sure Grip Detachable Scope Rings High

Weaver 1" Sure Grip Detachable Scope Rings High / Gloss Black - These Weaver rings combine the dependable "return to zero" feature of the Detachable rings with the "easy mounting" 210 degrees steel cap of the Pro-View mounts.

CHOOSING RINGS: Ring height is determined by measuring the outside objective (bell) diameter on your scope. Hardware Included (slotted screws).

Material: Aluminum with Steel Cap
Ring Height:

    Medium: .168" Fits up to a 40mm OBJ Lens
    High: .332" Fits up to a 44mm OBJ Lens
    Extra-High: .560" Fits up to a 50mm OBJ Lens

Notes:

    Mounting Hardware Included

$23.95

73IP04BK-R - Blackhawk Nylon IWB Holster RH 04 22lr-25acp

BLACKHAWK! Inside-The-Pants Holster

This lightweight holster design lets you carry a variety of pistols and revolvers inside the pants for the utmost in comfort and concealment. It features a rugged clip and a special moisture barrier layer that keeps sweat out while cushioning you against any sharp edges. The BLACKHAWK! Inside-The-Pants Holster features an open top for fast access and is constructed of a four layer laminate with a rugged belt clip. The interior's smooth nylon lining allows for a quick and easy draw while the suede like outer shell anchors holster securely inside your pants. These holsters are right hand draw only but the belt clip allows for use with any standard width pants belt.

Fits:
AMT "Backup"
Bauer .22 and .25 caliber
Beretta 20, 21, 950, Bobcat, Jetfire , Minx and Tomcat
Colt Mustang, Mustang II, Mustang Pocketlite and Pony
KBI PSP 25
Jennings J-22 and J-25
Raven P-25
Taurus PT-22 and PT-25
Walther TPH

Specifications and features:
Blackhawk inside-the-pants holster
Fits .22 & .25 caliber small-frame semi-automatic handguns
Right hand
Open top
4-layer laminate
Suede-like outer shell
Moisture-barrier layer
Standard belt clip
Black

$12.95

47908 - Glock 44 G44 22lr 22 10rd Pistol Magazine Black

    MANUFACTURER: GLOCK
    FAMILY: G44 Series
    MODEL: G44 Magazine
    TYPE: Accessory-Magazines
    CALIBER/GAUGE: 22 LR
    FINISH: Black
    FINISH TYPE: Black
    CAPACITY: 10 rd.
    SHIPPING WEIGHT: 0.2 lbs.
    ADDL INFO: Packaged Magazine
    MFG MODEL NO: 47908
    UPC: 764503035913
    WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov

$26.95

MAG549-BLK - Magpul Pmag 5 7.62 AC 308 5rd AR-10 AR10 Magazine

The Magpul PMAG (brown follower) 7.62 AC is a reliable and durable polymer magazine compatible with AICS-spec bottom metal and short action cartridges built on a 0.470" case head. The PMAG 7.62 AC is ideal for competition or combat use when those extra rounds are crucial. Built using M3 technology, this magazine is advanced in both material and manufacturing processes, and Magpul has given it more features to make it the most advanced, reliable bolt action magazine on the market.

Notes:

Combine the Magpul PMAG AC magazine with the Magpul Hunter 700 Detachable Magazine Well (#428372) for the ultimate drop-in solution for your Remington 700. Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington, .300 AAC Blackout, etc. Not compatible with Mossberg MVP.

Features

    Revised edition with brown follower
    Accepts a cartridge overall length of up to 2.86"
    Next-generation impact and crush resistant polymer construction
    Self-lubricating follower for increased reliability
    Long life stainless steel spring
    Paint pen dot matrix panels on the bottom of the body to allow for identification marking
    Flared floorplate aids magazine handling and is easy to disassemble for maintenance

$33.20

GUN PARTS AND ACCESSORIES