AR Furniture & Acc.

Limbsaver AR-15 M-16 Tactical Snap-On Recoil Pad Black - The LimbSaver AR-15/M4 Snap-On Recoil Pad securely snaps onto most six-position AR-15/M4 tactical stocks to reduce felt recoil by up to 50 percent while controlling muzzle jump. The recoil pad helps increase accuracy of follow-up shots and you’ll enjoy increased control for maximum stability. It’s made from LimbSaver’s proprietary NAVCOM technology (Noise and Vibration Control Material), which effectively absorbs a wide range of frequencies to dissipate energy and vibration. The no-slip surface stays in place, even in the rain. Quick and easy to install, the AR-15/M4 Snap-On Recoil Pad is durably built to be used outdoors in all harsh environments.

Using state-of-the-art technologies, LimbSaver produces highly effective noise- and vibration-dampening products for archery and firearm products, including bow stabilizers, recoil pads, rifle slings, and more. Proudly engineered and hand-made in the USA, LimbSaver products are widely used by outdoor enthusiasts, military, law enforcement, and more.

• Snaps onto most six-position AR-15/M4 tactical stocks
• Reduces muzzle jump allowing for faster target re-acquisition
• Helps keep rifle securely positioned against your shoulder
• Made from LimbSaver’s proprietary NAVCOM material to dampen vibration
• Built to be used outdoors in all harsh environments

Tweet

Magpul CTR AR Carbine Stock Mil-Spec - The Magpul CTR (Compact/Type Restricted) – Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in U.S.A.

FEATURES

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
• Supplemental friction lock minimizes accuracy robbing wobble*
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Premium chrome-silicon lock spring provides positive locking and long service life
• Side mounting slots accept optional cheek risers for NON AR15/M4 applications
• Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments
• Sling Mounts
  • Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
  • Rear/Bottom - 1.25" sling loops
  • Toe - Lanyard hole for custom para-cord rigs

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial Spec CTR
 

SPECIFICATIONS**

CTR Carbine Stock, Mil-Spec

• Weight: 8.8 oz.
• Weight, w/receiver extension: 12.8
• Length, max: 6.9 in.
• LOP Adjustment Range: 3.3 in.
• LOP, M4 Collapsed: ~10.5 in.
• LOP, M4 Extended: ~13.8 in.

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.

Tweet

UTG PRO Made in USA 6-Position Mil-spec Stock Assembly

• Proudly Made in USA
• Polymer Stock Made from Impact Resistant High-strength Material
• Mil-spec Diameter Extension Tube Made from Aircraft Aluminum with Rolled Threads, FDE Cerakote® Applied for Best Corrosion and Wear Resistance
• Built for Heavy-duty Operations with Tightest Tolerance Control
• Stock Assembly Complete with Action Spring, Buffer Assembly, Tear-drop Ring and Castle Nut

Tweet

Bravo Company, BCMGUNFIGHTER MOD 0 Adjustable Stock, Fits Mil Spec Buffer Tube, Black Finish

    The strongest light-weight polymer stock available for your mil-spec receiver
    2 different types of ambidextrous sling mounting options

Product Description

Bravo Company's BCMGUNFIGHTER Stock Mod 0 is the strongest light-weight polymer stock available for your mil-spec receiver extension. With no sharp edges this snag free design prevents the tangling of the rifle with the shooter's sling" molle gear or other kit.
The modular VBOST (Vehicle Borne Operations Sling Tab) interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly" this is the most common application when operating inside a vehicle.
It has 2 different types of ambidextrous sling mounting options" including QD swivel sockets and an integrated color matched rubber butt pad for secure shoulder placement" along with increased durability. With its simple modular design and 5 parts" and 1 screw its allows for modular adaption of future stock options and configurations.

Specifications
UPC    855877004916     
Manufacturer    Bravo Company
Manufacturer Part #    BCM-GFS-MOD-0-BLK     
Model    MOD 0
Type    Stock     
Color    Black

Tweet

Hogue, AR-15 6-Position Stock, Fits Mil-Spec Buffer Tube Only, Black Finish

    Hogue Collapsible Carbine Buttstock
    Mil-Spec Diameter (1.15" Diameter)
    Rubber Overmolded Polymer
    Textured
    Non-Slip Grip

Product Description

Hogue's AR-15 Collapsible 6-Position Overmolded Stock uses technology that merges a durable polymer core with the soft comfort of rubber overmolding. This process creates a desirable collapsible stock that provides the ultimate comfort along with weapon control. Hogue Overmolded buttstocks for the AR-15 platform are specially designed to retain the important lines and aesthetics of the AR while provided sleek and durable rubber overmolding. The overmolding process creates durable comfortable stock that will last you for many years to come.

Specifications
UPC    743108150405     
Manufacturer    Hogue
Manufacturer Part #    15040     
Type    Stock
Color    Black     
Description    AR15 6-Position Stock
Fit    AR Rifles     
Size    Fits Mil-Spec Buffer Tube Only

Tweet

Mission First Tactical, Battlelink Utility Stock, Fits 6 Position, Commercial Minimalist Size, Mil Spec, M4 Collapsible Stock, Black Finish

    Black finish
    Slide-on replacement for collapsible butt stock
    MilSpec Buffer Tube
    Angled non-slip rubberized buttpad
    Fits AR rifles

Product Description

All of the functional requirements are met while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and accepts a new optimized sling configuration. The lightest stock of its kind in the market.

Specifications
UPC    676315025856     
Manufacturer    Mission First Tactical
Manufacturer Part #    BMSMIL     
Model    Battlelink
Model    Minimalist     
Type    Stock
Color    Black     
Description    M4 Collapsible Stock
Fit    AR Rifles     
Size    Mil Spec

Tweet

Magpul CTR AR Carbine Stock – Commercial-Spec - The Magpul CTR (Compact/Type Restricted) – Commercial-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes.

Made in U.S.A.

FEATURES

• Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
• Supplemental friction lock minimizes accuracy robbing wobble*
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Premium chrome-silicon lock spring provides positive locking and long service life
• Side mounting slots accept optional cheek risers for NON AR15/M4 applications
• Replaceable 0.55" Extended Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments
• Sling Mounts
  • Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
  • Rear/Bottom - 1.25" sling loops
  • Toe - Lanyard hole for custom para-cord rigs

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil Spec CTR
 

SPECIFICATIONS**

CTR Carbine Stock, Commercial-Spec

• Weight: 9.3 oz.
• Weight, w/receiver extension: 13.6 oz.
• Length, max: 7.2 in.
• LOP Adjustment Range: 3.8 in.
• LOP, M4 Collapsed: ~10.8 in.
• LOP, M4 Extended: ~14.6 in.

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.

Tweet

The Magpul® Enhanced Rubber Butt-Pad, 0.70" is an optional replacement butt pad for the CTR® and MOE® Carbine Mil-Spec stocks as well as the original UBR®, all STR®, ACS-L™ and ACS™ stocks.

It is designed for enhanced shoulder purchase and offers improved recoil reduction with its thicker, vented construction. The Enhanced Rubber Butt-Pad can also be installed on Commercial-Spec MOE / CTR stocks, but may prohibit use of the fully collapsed position due to the extended, slanted back of most Commercial-Spec receiver extensions.

All mounting hardware included.

Made in the USA.

NOTE: Not compatible with MOE Fixed Carbine Stock.

Tweet

Magpul MOE AR Carbine Stock Commercial-Spec - The MOE Stock – Commercial-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M4 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes.

Made in U.S.A.

FEATURES

• Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, and others (please see the note below)
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Premium chrome-silicon lock spring provides positive locking and long service life
• Side mounting slots accept optional cheek risers for NON AR15/M4 applications
• Replaceable 0.55" Extended Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
• Sling Mounts
  • Rear/Bottom - 1.25" sling loops
  • Toe - Lanyard hole for custom para-cord rigs

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec MOE

SPECIFICATIONS*

MOE Carbine Stock, Commercial-Spec

• Weight: 8.5 oz.
• Weight, w/receiver extension: 13.8 oz.
• Length, max: 7.2 in.
• LOP Adjustment Range: 3.8 in.
• LOP, M4 Collapsed: ~10.8 in.
• LOP, M4 Extended: ~14.6 in.

* Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.

Tweet

The Rubber Butt-Pad, 0.30" comes standard with the CTR® and MOE® Mil-Spec Carbine models as well as all STR®, ACS-L™, ACS™ and UBR® stocks. It utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact / drop mitigation.

May also be installed on Commercial-Spec MOE / CTR stocks, but may prohibit use of fully collapsed position.

All mounting hardware included.

Made in the USA.

NOTE: Not compatible with MOE Fixed Carbine Stock.

Tweet

Magpul MOE AR Carbine Stock Mil-Spec - The MOE Stock Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in U.S.A.

FEATURES

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Premium chrome-silicon lock spring provides positive locking and long service life
• Side mounting slots accept optional cheek risers for NON AR15/M4 applications
• Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
• Sling Mounts
  • Rear/Bottom - 1.25" sling loops
  • Toe - Lanyard hole for custom para-cord rigs

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order the Commercial-Spec MOE
 

SPECIFICATIONS*

MOE Carbine Stock, Mil-Spec

• Weight: 8.0 oz.
• Weight, w/receiver extension: 12.0 oz.
• Length, max: 6.9 in.
• LOP Adjustment Range: 3.3 in.
• LOP, M4 Collapsed: ~10.5 in.
• LOP, M4 Extended: ~13.8 in.

* Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.

Tweet

Magpul STR AR Carbine Stock Mil-Spec - The Magpul STR (Storage/Type Restricted) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A storage-capable version of the CTR®, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design.

A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in U.S.A.
 

FEATURES

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
• Two water-resistant battery storage tubes located on the left and right sides of the stock
  • Each tube will store up to two (2) CR123A lithium or AA batteries
  • Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
• Supplemental friction lock minimizes accuracy robbing wobble*
• Premium chrome-silicon lock spring provides positive locking and long service life
• Sloping cheek weld provides a wide contact surface for user comfort
• Shielded release latch prevents snagging and accidental operation
• Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
• Sling Mounts
  • Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
  • Rear/Bottom – 1.25" sling loops

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial-Spec STR

Tweet

Magpul STR AR Carbine Stock Commercial-Spec - The Magpul STR (Storage/Type Restricted) is a drop-in replacement buttstock for AR15/M4 carbines using commercial-spec sized receiver extension tubes. A storage-capable version of the CTR®, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design.

A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in U.S.A.
 

FEATURES

• Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
• Two water-resistant battery storage tubes located on the left and right sides of the stock
  • Each tube will store up to two (2) CR123A lithium or AA batteries
  • Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
• Supplemental friction lock minimizes accuracy robbing wobble*
• Premium chrome-silicon lock spring provides positive locking and long service life
• Sloping cheek weld provides a wide contact surface for user comfort
• Shielded release latch prevents snagging and accidental operation
• Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
• Sling Mounts
  • Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
  • Rear/Bottom – 1.25" sling loops

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec STR

SPECIFICATIONS**

STR Carbine Stock, Commercial-Spec

• Weight: 12.3 oz.
• Weight, w/receiver extension: 16.3 oz.
• Length, max: 7.3 in.
• Width, max: 2.6 in.
• LOP Adjustment Range: 3.8 in.
• LOP, M4 Collapsed: ~10.9 in.
• LOP, M4 Extended: ~14.7 in.

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.

Tweet