AR Parts & Controls

Bushmaster Complete AR Lower Parts Kit - One of the most important purchases that one can make when building an AR-15 rifle is a good, quality lower parts kit. Known for quality, the Bushmaster lower parts kit is one of the most highly regarded kits on the market thanks to a long standing reputation for excellence. Everything you need to complete your lower receiver with the exception of the receiver extension, buffer and buffer spring. All needed springs, pins, and parts are included and are finished to proper military specifications. Includes a standard A2 style pistol grip, and a trigger guard.

Features and Specifications:
Manufacturer Number: 93384
Bushmaster AR-15 Lower Parts Kit Mil Spec Black
Includes everything necessary to completely build up lower receiver
Packaged in clampack
Made In The USA
Color: Black

Fits:
Mil-Spec AR-15 Lower Receiver

Tweet

CMMG AR-15 AR15 Lower Pin and Spring Kit

Parts Kit, AR15, Lower Pins and Springs

Tweet

Anderson Complete AR Lower Parts Kit Blk Trigger - The Lower Parts Kit for AM-15 includes the following: Bolt Catch, Bolt Catch Plunger, Bolt Catch Roll Pin, Bolt Catch Spring, Buffer, Retainer, Buffer Retainer Spring, Disconnect, Disconnect Spring,  Traditional Hammer (Black in Color), Hammer Pin, Hammer Spring, Magazine Catch, Magazine Catch Button, Magazine Catch Spring, Pistol Grip (A2 style), Pistol Grip Lock Washer, Pistol Grip Screw, Pivot Pin, Pivot Pin Detent, Pivot Pin Detent Spring, Selector, Selector Detent, Selector Detent Spring, Takedown Pin, Takedown Pin Detent, Takedown Pin, Detent Spring, Traditional Trigger (Black in Color), Trigger Guard, Trigger Guard Roll Pin, Trigger Pin, Trigger Spring.

Tweet

ASAP - Ambidextrous Sling Attachment Point

For range of motion greater than 180 degrees

The ASAP Ambidextrous Sling Attachment Point allows a range of motion greater than 180 degrees, enabling true ambidextrous weapon manipulation for both left and right handed shooters. The ASAP replaces the standard AR15/M4 carbine stock receiver end plate, providing a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP works with one-point type slings with snap hook style attachments such as the Magpul MS3.

Made from precision cast black manganese phosphatized steel, The ASAP  is a durable welded-link ring that is compatible with both Mil-Spec and Commercial-Spec carbine receiver extensions (buffer tubes). The ASAP has been proven to withstand stress tests of over 300lbs.

Made in the USA.

Tweet

Brand     TacFire
Category     Stock Accessories
Model     AR15
Series     Buffer Tube Kit
Type     Buffer Assembly
Firearm Type     AR-Platform
Size     Mil-Spec
Gun Style     AR-Platform
Length     8"
Weight     13 oz
Search Code     TACFIRE
Similar Items     BUFFER

Tweet

Carbine Lock Ring/Castle Nut

Specs:
Threaded Steel ring used to retain the carbine buffer tube to the lower receiver

Finish:
Maganese Phoshate

Tweet

Bravo Company, Stock Hardware Mount Kit, Fits AR Rifles, Mil-Spec Buffer Tube, Stock Kit Contains Buffer, Tube, Spring, & Hardware, Black

    This kit is compatible with the plastic stocks from
    BCM" VLTOR" LMT" Magpul CTR-M" Stag Arms" Colt

Product Description

Bravo Company's BCM Mil-Spec Carbine Stock Hardware Mounting Kit for AR-15's contains all the necessary parts to mount your Mil-Spec dimension stock assembly to your lower receiver- Receiver Extension (Mil-Spec, 6 position), Receiver End Plate, Castle Lock Nut, M4 action spring, carbine buffer assembly. This kit is compatible with the collapsible stocks from- BCM, VLTOR, LMT, Magpul CTR-M, Stag Arms, Colt and others.

Specifications
UPC    855877004404     
Manufacturer    Bravo Company
Manufacturer Part #    BCM-STOCK-HARDWARE-KIT     
Type    Buffer Tube Complete Assembly
Color    Black     
Description    Stock Kit w/ buffer, tube, spring, & hardware
Fit    AR Rifles     
Subcategory    Stocks & Buffer Tubes
Finish    Matte

Tweet

A high quality lower parts kit needed to assemble your AR-15 lower. Parts are made in USA! Assembly takes place right here at our new facility in Columbia, SC.

Features  black oxide coated hammer and trigger springs.

Includes:

Trigger
Bolt Catch
Trigger Spring
Disconnecter
Hammer
Disconnecter Spring
Hammer Spring
Magazine Catch Spring
A2 Grip
Bolt Catch Roll Pin
Buffer Retainer Pin
Magazine Release Button
Buffer Retainer Spring
Magazine Catch
Trigger Guard
Pivot Pin
Safety Selector
Selector Spring
Bolt Catch Spring
Safety Selector Detent
Detent Spring
Rear Take Down Pin
Bolt Catch Plunger
Takedown Pin Detent

Tweet

Raptor Ambidextrous Charging Handle

The Raptor™ is truly revolutionary in design & function. From rapid palm “blading” or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and MILSPEC anodized.

Tweet

YHM AR Low Profile Gas Block (Set Screw) - This gas block replaces your existing front sight to provide a simple, low profile design that can be used to mount a rifle length forearm to a carbine length barrel. It is mounted by the use of two set screws.

Manufactured from high quality steel and finished with a mil. spec. phosphate coating.

Length: 0.95"
Bore diameter of .750 inches.

Made in the U.S.A.

Tweet

Patriot Ordnance Factory, Selector Switch, Ambidextrous, Black

    Ambidextrous
    Easy Installation
    Drop-In Design

Product Description

The POF-USA ambidextrous safety selector is a drop in upgrade designed to increase the shooters' options and maximize the efficiency of taking the rifle from "fire" to "safe". Installation of this product is nearly identical to installing a standard selector, the only difference is once the selector is installed you will need to attach the right side lever using a 1/16 Allen.

Specifications
UPC    847313006660     
Manufacturer    Patriot Ordnance Factory
Manufacturer Part #    00666     
Color    Black
Description    Ambidextrous Selector Switch    

Tweet

Leapers, Inc. - UTG, Receiver Wedge, Keeps Upper Section Snug and Tight Against Lower, Increases Accuracy, Decreases Vibration and Prevents Wear, Red

    Increases Accuracy
    Decreases Vibration
    Prevents Wear

Product Description

The UTG Receiver Wedge fits near your takedown pin and keeps the upper snug and tight against the lower.

Specifications
UPC    4712274525351     
Manufacturer    Leapers, Inc. - UTG
Manufacturer Part #    RB-A005     
Type    Takedown Pins
Color    Red     
Subcategory    Long Gun Parts

Tweet

Doublestar Corp., OOPS! Replacement Kit, For Most Commonly Lost Parts

    Replacement parts
    For Builds or Repairs
    Pins, springs, and detents

Product Description

Sometimes parts go missing or need replacement. Don't be caught unprepared with a useless rifle and stand ready with the Double Star Oops! Kit. The kit fits easily in your range bag, backpack, and even in your pocket. Never say "Oops!" with the Double Star Replacement Kit. Parts included:
4-Takedown detent springs
4-takedown detents
2- buffer detents
2- buffer detent springs
2- firing pin retaining pins
2- extractor springs with bumper pads
2- selector springs/ ejector springs
2- selector detents

Specifications
UPC    841348100294     
Manufacturer    Doublestar Corp.
Manufacturer Part #    AR791     
Type    Kit
Description    Replacement Kit for most commonly lost parts    

Tweet

LBE Unlimited, Lower Parts Kit Part Kit, 223 Rem/556NATO, Black Finish, With Pistol Grip and Trigger Guard

    Complete Parts Kit
    Fits AR-15
    Includes A2-Grip and Trigger Guard

Product Description

AR15 Complete Lower Parts Kit. Perfect for your next custom build.

Specifications
UPC    765857617282     
Manufacturer    LBE Unlimited
Manufacturer Part #    AR15LPKT     
Model    AR-15
Model    AR15     
Model    Lower Parts Kit
Type    Lower Parts Kit     
Description    Kit w/ Pistol Grip & Trigger Guard

Tweet

AR-15 Ambi Single Point Sling Adapter


    Steel

    Ambidextrous

    Allows QD Use of One Point Sling

 

Tweet

Strike Industries, Charging Handle, Extended Latch, Black

    Hard Anodized Finish
    Forged 7075 T-6 Aluminum construction
    Aluminum Enlarged Extended LATCH

Product Description

The new ARCH-EL Charging Handle from Strike Industries is a 7075 T-6 milled hard anodized charging handle featuring a larger latch surface that functions with ease in adverse conditions and is now available in both the AR15 and AR10 platforms. With its high polished surface, its ergonomic design makes for a smooth, clean charge. The quality of the ARCH-EL is second to none and it's built for durability. Its gas busting ability diverts harmful gases, oil and dirt away from the shooter. Once you place the ARCH-EL on your rifle, you will see, feel, and know the quality of the ARCH-EL!

Specifications
UPC    700598349948     
Manufacturer    Strike Industries
Manufacturer Part #    SI-ARCH-EL-BK     
Type    Charging Handle
Color    Black     
Subcategory    Long Gun Parts

Tweet

CMMG Lower Parts Kit AR15 Gun builder’s Kit - Gun builders kit includes most of the necessary parts to build up your lower group except the commonly upgraded parts. Does not include Trigger Guard, Fire Control Group, and pistol grip.

Tweet

Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. (Battery Assist Device) Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control / ready position with the right-hand trigger finger.

Made from Mil-Spec anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms.

All mounting hardware included.

Made in the USA.

Tweet