GUN PARTS AND ACCESSORIES

Walther CCP 9mm 8rd Magazine - Make sure you have a spare magazine with the Walther CCP 9mm Luger Magazine. This magazine is a factory replacement that has been built to the same exacting standards as all of Walther's products. Insist on genuine factory Walther magazines for your Walther pistol.

Features and Specifications:
Manufacturer Number: 50860002
Walther Factory Magazine
Caliber: 9mm Luger
Capacity: 8 Rounds
Body Material: Stainless steel
Spring Material: Steel
Follower Material: Steel
Baseplate Material: Polymer
Finish: Natural Stainless

Fits:
Walther CCP

Tweet

Remington 7600 760 Short Action 4rd 6mm Rem. /.257 Roberts / 7mm-08 Rem / .243 Winchester /.308 Winchester Magazine - This is a Remington factory replacement magazine for the Remington Model Six/76/760/7600. This is a standard replacement part designed to fit Short Action calibers. It is manufactured to Remington's strict specifications and tolerances to ensure perfect fit and reliable function. Insist on genuine factory magazines for your firearm!

Features and Specifications:
Manufacturer Number: 19636
Remington 76/760/7600 6mm/.257/.243/.308 Magazine 4 Rounds Steel Blued
Caliber: 6mm Rem./.257 Roberts/ 7mm-08 Rem / .243 Winchester/.308 Winchester
Capacity: 4 Rounds
Body Material: Steel
Spring Material: Higher Tensile Music Wire
Follower Material: Polymer
Follower Color: Black
Short Action Calibers
Remington Factory Detachable Box Magazine
Finish: Blued

Fits:
Remington Model Six/76/760/7600 rifles in these calibers:
6mm Remington
.257 Roberts
7mm-08 Remington
.243 Winchester
.308 Winchester

Tweet

Magpul Industries, Rail Light Mount, Aluminum, Fits M-LOK, Black, Cantilever

    Directly mounts to M-LOK compatible T-nuts
    Recoil/Impact mitigation lugs
    Milspec-anodized aluminum

Product Description

Designed for use with all M-LOK mounting surfaces, the M-LOK Aluminum Cantilever Rail/Light Mount allows the attachment of various MIL-STD-1913 Picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular Surefire M300/M600 series Scout Lights or Magpul Light Mount V-Block and Rings. The Cantilever Rail/Light Mount has Picatinny slots that extend forward .75"-1.5" past the M-LOK mounting slot to improve ergonomics and optimize accessory positioning in a wide variety of uses, while keeping lights and accessories low to reduce the weapon's profile. Machined from milspec-anodized aluminum, the Cantilever Rail/Light Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 3 MIL-STD-1913 Slots, max overall length of 3.15". Made in U.S.A.

Specifications
UPC    873750001791     
Manufacturer    Magpul Industries
Manufacturer Part #    MAG588     
Model    Rail Light Mount
Color    Black     
Description    Cantilever
Fit    M-LOK     Subcategory    
Handguard Accessories

Tweet

    MANUFACTURER: Taurus
    FAMILY: TX22 Series
    MODEL: TX22 Magazine
    TYPE: Accessory-Magazines
    CALIBER/GAUGE: 22 LR
    CAPACITY: 16
    SHIPPING WEIGHT: 0.15 lbs.
    MFG MODEL NO: 358-0017-01
    UPC: 725327901389
    WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov

Tweet

Springfield Armory XDS 45acp 7rd Magazine - This is a factory Springfield Armory XD-S .45 ACP Magazine. This magazine features a 7 round capacity constructed from Stainless Steel. It features a polymer base plate, polymer follower, and features a grip X-Tension grip sleeve. The magazine is made to the same specifications and features as the magazine that came with your firearm.

Features and Specifications:
Manufacturer Number: XDS50071
Springfield Factory Magazine
Caliber: .45 ACP
Capacity: 7 Rounds
Body Material: Steel
Spring Material: Steel
Follower Material: Polymer
Baseplate Material: Polymer
Black X-Tension Grip Sleeve
Finish: Natural Stainless

Fits:
Springfield Armory XD-S chambered in .45 ACP using X-Tension Backstraps #1 or #2

Tweet

ADCO, Mag Loader, Fits Most 9MM-45ACP Single Stack Magazines, Fits 1911, S&W Shield, Sig 220/938, Springfield XDS, Black

    Accepts Most Single-Stack Magazines
    Easier & Faster Reloading

Product Description

Reloading magazines takes a lot of cheer out of a day of shooting fun. With the ADCO Super Thumb Loader, you should be in good shape but you might need to bring a little extra ammo so you don't run out.

Specifications
UPC    733315010036     
Manufacturer    ADCO
Manufacturer Part #    ST3     
Type    Mag Loader/Unloader
Model    Super Thumb     
Capacity    N/A
Color    Black     
Fit    9MM-45ACP
Subcategory    Speed Loaders

Tweet

A-Zoom, Snap Caps, 38 Special, 6 Pack

    Solid Aluminum
    Hard Anodized
    Smooth Functioning
    Precise Cartridge Dimensions

Product Description

For safety training, function testing or safely decocking without damaging the firing pin, A-Zoom training rounds are much more than conventional snap-caps. They are precision CNC machined from solid aluminum to precise cartridge dimensions, then hard anodized for ultra-smooth functioning and long life.

Specifications
UPC    666692161186     
Manufacturer    A-Zoom
Manufacturer Part #    16118     
Caliber    38 Special
Type    Snap Caps     
Color    Red
Units per Box    6Pk     
Subcategory    Training Equipment
Material    Aluminum

Tweet

Birchwood Casey, Dirty Bird Target, Bullseye, 8", 25 Targets

    Great for Indoor or Outdoor Ranges
    Tagboard Construction
    Improved Visibility and Contrast

Product Description

Birchwood Casey is the name you know and trust when it comes to targets. They offer high quality, affordable products made for serious shooters and beginners alike. Whether you're heading to the range for a day of fun with family and friends, or getting some practice in before your next competition, Birchwood Casey has the targets you need.

Specifications
UPC    029057358254     
Manufacturer    Birchwood Casey
Manufacturer Part #    BC-35825     
Model    Dirty Bird
Model    PT8-25     
Type    Target
Size    8"     
Description    Bullseye
Units per Box    25 Targets     
Units per Box    25Pk
Subcategory    Paper Targets

Tweet

Bianchi 100 Sz 13 S&W Shield 9 40 Holster - The Model 100 Professional holster is a comfortable inside-the-waistband design offering deep concealment. It rides at an optimum angle inside the waistband to ensure a secure fit and a proper firing grip on the draw. The high back provides a shield between the body and potentially sharp edges of the pistol for comfort and to protect clothing. A heavy-duty spring-steel belt clip safely and securely anchors the holster to the waistband or belts up to 1.75” wide. Made from premium full grain cowhide, the Professional holster features a non-slip suede-lined exterior that sits next to the body.


Smith & Wesson
        M&P Shield 9, 3.1 Inch
        M&P Shield 40, 3.1 Inch

Due to MAP pricing please contact us for the BEST PRICE.

Tweet

Hogue Rubber Monogrip Ruger SP101 Grips - Hogue rubber grips are molded from a durable synthetic rubber that is not spongy or tacky, but gives that soft recoil absorbing feel, without effecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene and results in a much superior grip. The material used does not come apart or deteriorate and is resistant to all solvents and oils used around firearms.

Hogue Grips give you a lasting precision fit and durability that will provide years of dependable service. The flexibility of the materials and molding process has allowed Hogue to produce superior rubber grips with features that out perform all other makes.

Fits: Models Ruger SP101
Mfg. Model: 81000

Tweet

Sticky Holsters MD-2 - Suitable for small 9MM’s - Med/Sm autos with trigger guard laser, Springfield XD-S 3.3, and S&W Shield WITHOUT lasers will need our MD-4. Ambidextrous fit for left or right handed users.
 

Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use. 
 

THE MD-2 STICKY HOLSTER FITS THE FOLLOWING GUNS:

Model Name	Caliber	Barrel
American Derringer LM4 Slimmerling	45ACP	2
Beretta Nano	9MM	3.07
Beretta PX4 Storm Sub Compact	9MM, 40 S&W	3
Boberg XR9	9MM	3.35
Springfield Armory XD-S	45 acp	3.3
Smith and Wesson Shield	9mm/40	3.1
Smith and Wesson Chief Special	9mm	3
Smith and Wesson Chief Special	45	3.25
Springfield Armory XD Sub-Compact	40	3
Springfield Armory XD MOD 2	9/40	3
Sig Sauer P290	9MM	2.9
Ruger LC9	9MM	3.12
Glock 42 with front mounted laser Also any MD-1 gun with a front mounted laser

Tweet

Featuring an open top and open muzzle design, this leather belt holster features deep molding for a perfect fit. Two piece contruction with front molding and backside contour to the body, creating a comfortable carry while leather lining protects your gun's finish. This open OWB holster is a great fast draw option. Belt slots accommodate belts up to 1 3/4" wide.

Fits: Most 9mm / 40 s&w / 45acp double stack simular to Glock 19 / 23 - RH

Tweet

LaserMax, Spartan, Green Laser, Fits Picatinny, Black Finish, Adjustable Fit, with Battery

    Advanced mounting technology
    Accessory rail permits attachment of tactical light
    Auto-off after 10 min
    Over-sized electronic touch pads

Product Description

Featuring the latest LaserMax mounting technology, Spartan(TM) installs in the preferred rail location for each operator's personal comfort and ease of use. Once anchored, Spartan maintains precision accuracy over extensive live fire. Revolutionary in design, Spartan is the most versatile and feature-rich rail mounted laser sight ever conceived. Emitting the industry's brightest green laser aiming point, Spartan features a preservation mode that automatically deactivates the laser after a ten minute period of inactivity, safeguarding against unintentional battery drain. Dual electronic touch pads enable both left and right-handed shooters to activate the laser with ease. User programmable for a steady or high-visibility pulsed beam, Spartan is fully adjustable for windage and elevation, ensuring the most precise targeting over all shooting distances.

Specifications
UPC    798816543216     
Manufacturer    LaserMax
Manufacturer Part #    SPS-G     
Model    Spartan
Type    Laser     
Fit    Picatinny
Accessories    Battery     
Color    Black
Subcategory    Lasers

Tweet

Bulldog FSN-12 Black Revolver Holster - Fits Revolvers w/ 3 – 4″ Barrels ( S&W – J, K, L, N & Taurus Judge, Etc )
 

Bulldog® Extreme – Pistol Holster Belt Loop & Clip (AMBI)

Durable Nylon Water-Resistant Outer Shell & Top Grade Fused Padding Provide The Ultimate In Fit, Comfort & Protection For You & Your Pistol
–  Ambidextrous Belt Loop & Metal Clip
–  Soft, Scratch Resistant Inner Lining
–  Spine Protector Keeps Gun Sights From Tearing The Inner Lining

Tweet

HKS Speedloader 29-M 6 Shot 44spl / 44mag - The HKS Revolver Speedloader instantly drops cartridges with just the slightest twist, loading the entire cylinder of your revolver. Strong metal points hold cartridges securely in the lightweight polymer body until released. The knurled aluminum knob allows for a sure grip under the most stressful circumstances and the also makes the speedloaders easier to grab out of a pouch. All HKS products are proudly made in the USA.

Technical Information: HKS Revolver Speedloader

Materials: Injection Molded Delrin Plastic with aluminum Knob

Notes:

• Oversized Grips: Some revolvers have grips that interfere with speedloaders. These grips must be altered or replaced so the speedloader does not touch the grip when cartridges are released

Fits: Colt Anaconda, Dan Wesson, Ruger Redhawk, Super Redhawk, S&W 29, 629, Taurus Raging Bull 44 Special/44 Magnum
 

Tweet

BLACKHAWK, Stache, Inside Waistband Holster, Ambidextrous, Fits Glock 19, 23, 44, 45, Black, Polymer

 

Specifications
UPC    604544673500     
Manufacturer    BLACKHAWK
Manufacturer Part #    416002BK     
Model    Stache
Type    Inside Waistband Holster     
Hand    Ambidextrous
Color    Black     Fit    
Fits Glock 19, 23, 32, 44, 45
Subcategory    Holsters     
Material    Polymer

Tweet

Uncle Mike's Sidekick Right Handed Vertical Shoulder Holster Size 15 - Superior weight distribution, along with ultra-snug firearm retention make our vertical shoulder holsters ideal for even the most active pursuits.

Freedom of movement – Onside self-adjusting belt loop keeps holster close to your side. Fully adjustable shoulder harness with 2 1/2"-wide nylon web straps and a self-centering back-piece. Fits up to 48" chest
Choose your style – Offside tie-down anchors harness to belt and lets you carry a speedloader or magazine case vertically or horizontally. Wear inside or outside your jacket
Secure – Retention strap with combination adjustable buckle and snap keeps firearm in place
Scoped Holsters available – Black or Realtree Hardwoods® Grey HD™ Camo. Left-handed, Black only

Fits: 3 3/4" - 4 1/2" barrel large autos

Tweet

Fobus, E2 Paddle Holster, Fits Ruger LCR/SP101, Right Hand, Kydex, Black

    Passive retention, one-piece holster body construction
    Lightweight design
    Low profile design for concealability
    Rubberized paddle backing for extra stability and comfort

Product Description

The next step in the evolution of holster design. One piece holster body construction with adjustable retention screw allows the user to customize the holster retention pressure.

Specifications
UPC    676315006794     
Manufacturer    Fobus
Manufacturer Part #    RU101     
Model    E2
Model    Paddle     
Type    Holster
Color    Black     
Fit    Ruger SP101, LCR Charter Arms Bulldog, Pitbull, Boomer, Mag Pug
Subcategory    Holsters     
Material    Polymer

Tweet