AR AK Acc, Tools, & Parts
Hope to see you soon,
Fred Emerson III
Owner
FOR MAGAZINES CLICK HERE
- WE DO NOT POST ALL OUR ACCESSORIES ON THIS WEBSITE.
- ALL QTY'S ARE SET AT ONE REGARDLESS OF QTY IN STOCK
A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
- Two water-resistant battery storage tubes located on the left and right sides of the stock
- Each tube will store up to two (2) CR123A lithium or AA batteries
- Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
- Supplemental friction lock minimizes accuracy robbing wobble*
- Premium chrome-silicon lock spring provides positive locking and long service life
- Sloping cheek weld provides a wide contact surface for user comfort
- Shielded release latch prevents snagging and accidental operation
- Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
- Rear/Bottom – 1.25" sling loops
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec STR
SPECIFICATIONS**
STR Carbine Stock, Commercial-Spec
- Weight: 12.3 oz.
- Weight, w/receiver extension: 16.3 oz.
- Length, max: 7.3 in.
- Width, max: 2.6 in.
- LOP Adjustment Range: 3.8 in.
- LOP, M4 Collapsed: ~10.9 in.
- LOP, M4 Extended: ~14.7 in.
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
- Two water-resistant battery storage tubes located on the left and right sides of the stock
- Each tube will store up to two (2) CR123A lithium or AA batteries
- Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
- Supplemental friction lock minimizes accuracy robbing wobble*
- Premium chrome-silicon lock spring provides positive locking and long service life
- Sloping cheek weld provides a wide contact surface for user comfort
- Shielded release latch prevents snagging and accidental operation
- Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
- Rear/Bottom – 1.25" sling loops
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial-Spec STR
Tweet |
Its base is machined from Mil-Spec anodized aluminum and utilizes a coated steel loop, which accepts up to 1-1/4” webbing. With its compact and low profile design, it provides a minimal footprint, creating more hand guard real estate. Like any other Magpul M-LOK accessory, the M-LOK GI Sling Swivel features recoil / impact mitigation lugs and cammed T-Nuts for proper M-LOK engagement.
Made in the USA.
Tweet |
Mounts to M-LOK compatible hand guards and clip-style sling attachments
Durable steel construction
Product Description
The M-LOK Paraclip Sling Mount is a steel clip-in sling mount for M-LOK compatible systems. It is constructed of high-grade, precision cast steel and has an extremely durable Melonite finish. With a low-profile and snag-free design it fits a wide range of clips, including the Magpul Paraclip. Made in U.S.A.
Specifications
UPC 873750002859
Manufacturer Magpul Industries
Manufacturer Part # MAG607
Model M-LOK Paraclip
Type Sling Mount
Color Black
Fit M-LOK
Description M-LOK Paraclip Sling Mount
Subcategory Sling Hardware
Tweet |
Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
Product Description
Bravo Company's BCMGUNFIGHTER KAG-MCMR Kinesthetic Angled Grip" M-Lok compatible" is the end result of collaboration between BCM(R) and Travis Haley" founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.
Designed to complement modern shooting grips" the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist" elbow" and shoulder" allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back" the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions. Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support and works as a rest for supported firing positions.
Specifications
UPC 812526021687
Manufacturer Bravo Company
Manufacturer Part # BCM-KAG-MCMR-BLK
Model Kinesthetic Angled Grip
Type Grip
Color Black
Description Kinesthetic Angled Grip
Fit MLOK Compatible
Tweet |
Push-button quick-detach sling swivel for 1-1/4" webbing
Compatible with QD sling attachment points
Manganese-phosphate finished steel
Product Description
Push-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for two to one-point convertible sling. Made in U.S.A.
Specifications
UPC 873750010854
Manufacturer Magpul Industries
Manufacturer Part # MAG540
Model QD
Model Sling Swivel
Type Swivel
Color Black
Subcategory Sling Hardware
Tweet |
Made in the U.S.A.
Steel construction
Ambidextrous
Product Description
The RSA QD provides a forward attachment point for the Magpul MS4(R) Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.
Specifications
UPC 873750008653
Manufacturer Magpul Industries
Manufacturer Part # MAG337
Model RSA- Rail Sling Attachment
Model QD
Type Sling Mount
Color Black
Fit Picatinny
Accessories QD Sling Cups
Subcategory Sling Hardware
Tweet |
Forward rake gives positive retention when using "C-clamp" method of handguard support
Works as a rest for supported firing positions
Small profile
Product Description
Bravo Company's BCMGUNFIGHTER KAG-1913 Kinesthetic Angled Grip" Picatinny 1913 Rail Version" is the end result of collaboration between BCM(R) and Travis Haley" founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.
Designed to complement modern shooting grips" the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist" elbow" and shoulder" allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back" the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions. The new Patent Pending BCM(R) Direct Mount Picatinny 1913 interface system" was developed to be the most rigid" light-weight" and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. BCM(R) has developed a patent pending anchor system that not only secures to the mounting surface" but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM(R) direct mount interface system reduces those issues and offers a more secure lockup" eliminating play in the mounting surface.
Specifications
UPC 812526020239
Manufacturer Bravo Company
Manufacturer Part # BCM-KAG-1913-BLK
Model Picatinny
Model Kinesthetic Angled Grip
Type Grip
Color Black
Tweet |
Low profile M-LOK bipod mounting solution
Mil-spec anodized aluminum
Beveled ends and corners
Product Description
The Magpul M-LOK Bipod Mount allows for the attachment of Harris(R)-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is also compatible with other accessories that attach to traditional sling studs. Machined from milspec-anodized aluminum, the M-LOK Bipod Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Max overall length of 2.33 in. Made in U.S.A.
Specifications
UPC 873750004488
Manufacturer Magpul Industries
Manufacturer Part # MAG609
Model M-LOK Bipod Mount
Type Accessory
Color Black
Fit M-LOK Hand Guard
Subcategory Bipods
Tweet |
M-LOK compatible
Low-profile length
A lightweight design at 1.9 ounces
Product Description
Bravo Company's BCM Gunfighter's Vertical Grip MOD 3 is M-Lok compatible. It has a low-profile length for increased mobility and decreases "snag" factor. The forward angle increases the rigidity of the forearm while providing a more natural wrist angle. It can be mounted in reverse angle to increase your control when grabbing the handguard and grip. The flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. It is manufactured from high quality" impact resistant polymers. Made in the USA.
Specifications
UPC 812526021595
Manufacturer Bravo Company
Manufacturer Part # BCM-VG-MCMR-MOD-3-BLK
Model Vertical Grip
Model BCM Gunfighter
Model Vertical Forend Grip
Type Grip
Color Black
Fit MLOK Compatible
Tweet |
2.00" tubular webbing with closed cell foam
Invista solution dyed CORDURA(R) webbing
ITW GhilleTex(TM) Acetal hardware - a military grade" low IR plastic
Product Description
While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear,s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world's standard Vickers Combat Applications Sling(TM), a RED(TM) Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221(TM) Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket.
Specifications
UPC 814520015266
Manufacturer Blue Force Gear
Manufacturer Part # VCAS-200-OA-BK
Model No Quick Release Attached with TriGlide instead of Loop Lock
Model Molded Acetal Adjuster
Type Sling
Color Black
Description 2-Point Combat Sling
Accessories Padded
Subcategory Slings
Tweet |
Black finished steel
Product Description
Sling Snap Hooks are fast" secure sling attachment hardware that allows quick installation and removal of any sling they are attached too. The Sling Snap Hook has a 1" sling slot.
Specifications
UPC 814520014535
Manufacturer Blue Force Gear
Manufacturer Part # P-HK-100
Type Mount
Color Black
Tweet |
Features
MASH Hooks are an excellent alternative to HK Hooks and provide a secure and fast sling connection for weapons with larger eyelets such as AKs. The MASH Hook is activated by squeezing the center tabs together which opens the gate for installation and removal from eyelets.
Install with an Elastic Hook Cover to minimize noise and protect the weapon finish. (Sold separately)
As with all Blue Force Gear, it is made with excellence in the USA and carries a limited lifetime warranty.
Applications
Fits:
Sling connections for weapons with larger eyelets such as AK type weapons.
Tweet |
Do not install UWLs around the buffer tube of M4s as this may interfere with the operation of the charging handle
Product Description
The Universal Wire Loop is one of the most versatile sling attachment points made. A flexible nylon coated stainless steel wire allows for a sling attachment through eyelets" loops" slots" or any other opening that the wire fits through. The sling loop body is CNC machined from 6061-T6 aluminum billet before being tumbled and bead-blasted for a non-reflective surface. The loop is hard-coat anodized before the nylon coated stainless steel aircraft-grade cable is installed with ball-shank ends. The result is a sling adapter with limitless uses. Cable outer coating may deform if subjected to extreme barrel heat but the stainless core will not melt. Universal Wire Loops are quieter and stronger than traditional hook attachments and won't wear through eyelets.
Specifications
UPC 814520013040
Manufacturer Blue Force Gear
Manufacturer Part # UWL-325-BK
Type Mount
Color Black
Subcategory Sling Hardware
Tweet |
1.25" webbing on both ends secured with included triglides
Fits standard M4 carbines and other carbines and rifles
Product Description
The Patent Pending Vickers Combat Applications Sling(TM) has revolutionized the way we carry automatic rifles. Developed with industry friend" expert" and former 1st SFOD-Delta operational member Larry Vickers and author of the Vickers Guide series of firearms books" the Vickers Sling(TM) incorporates key features from real world experience that makes the two point sling effective and durable - the choice tactical sling requested by name. The Vickers Sling(TM) has been Blue Force Gear's most popular product of all" with service in every branch of service here at home as well as several foreign militaries" making it the clear choice of AR-15 slings. Able to quickly transition from carrying a slung rifle comfortably to combat ready" the patent pending Quick Adjuster has bridged the gap between the two primary uses of weapon slings - from transporting to fighting. All Vickers Slings(TM) are built with precision and pride right here at home in the US with superior materials.
Specifications
UPC 814520015228
Manufacturer Blue Force Gear
Manufacturer Part # VCAS-125-OA-BK
Model No Quick Release Attached with TriGlide instead of Loop Lock
Model Molded Acetal Adjuster
Type Sling
Color Black
Description 2-Point Combat Sling
Tweet |
* 34mm model features 20 MOA elevation built in.
Technical Information:
Height A (from rail to bottom of scope ring):
1" = 1.0"
30mm = 1.0"
34mm = 0.68"
Width B (rings):
1" = 1.57"
30mm = 1.75"
34mm = 1.90"
Height C (from rail to middle of scope rings):
1" = 1.5"
30mm = 1.6"
34mm = 1.35"
Length D (front of front ring to back or rear ring):
1" = 4.15"
30mm = 4.15"
34mm = 4.92"
Length E (between rings):
1" = 2.15"
30mm = 2.15"
34mm = 2.9"
Tweet |
Features and Specifications:
Manufacturer Number: 93384
Bushmaster AR-15 Lower Parts Kit Mil Spec Black
Includes everything necessary to completely build up lower receiver
Packaged in clampack
Made In The USA
Color: Black
Fits:
Mil-Spec AR-15 Lower Receiver
Tweet |
Features and Specifications:
Manufacturer Number:55CA6C5
AR-15 Complete Lower Parts Kit
Finish: Black
Includes:
Pistol Grip
Fire Controls And Pins
Standard Trigger
Fits: AR-15 Lower Receivers
Tweet |