View All Rifle Mags
Hope to see you soon,
Fred Emerson III
Owner
Our magazines are manufactured 100% start to finish in the USA using .020 gauge 410 Stainless Steel Alloy, heat treated for superior strength and lasting endurance. Our magazines are chemically treated for corrosion resistance [ref QQ-P-35] and coated with our proprietary finish, Marlube which is a wear-in not wear-off coating that burnishes into the surface providing self-lubricating properties. The interior dimensions of OAL 2.316 .002 are perfect for reloads. From first to last rounds feed flawlessly through our 7.62x39 magazines the proof is when you squeeze the trigger.
Features and Specifications:
Manufacturer Number: 7.62x30RD-SS
Chrome Silicon Springs
Enhanced Anti-tilt Polymer Followers
300 Series SS Floor plate- Powder coated Matte Black
Tweet |
Features and Specifications:
Manufacturer Number: 5-76239-SS-BM-B-ASC
ASC AR-15 Magazine
Caliber: 7.62X39
Capacity: Five Rounds
Body Materials: .020 gauge 410 Stainless Steel Alloy
Spring Material: Chrome Silicon
Follower Material: Polymer
Baseplate Material: 300 Stainless Steel Alloy
Follower Color: Black
Heat treated for strength and durability.
Chemically treated for corrosion resistance.
Enhanced Anti-Tilt Polymer Followers
Finish: Black Marlube, Matte Black Powder Coated Baseplate
Fits:
AR-15 Platforms
Tweet |
Driven by the spirit of innovation that began more than 38 years ago, Bushmaster has PROVEN itself above all other MSR manufacturers through hard use in competition, in the woods, and on the prairies of America. Engineered with proprietary processes and manufactured to the tightest tolerances, Bushmaster firearms ensure long-lasting service in any application. For unfailing shootability, always use Bushmaster.
The Bushmaster AR-15 Magazine is a standard replacement magazine. This magazine is designed to fit Bushmaster and other AR-15 variant rifles chambered in .223 Remington/5.56 NATO. It holds 20 rounds of ammunition and has an anti-tilt follower. The magazine is made of aluminum and comes in a black finish.
Features and Specifications:
Manufacturer Number: 93304
Bushmaster AR-15 .223/5.56 Magazine 20 Rounds Aluminum Black
Caliber: .223 Remington/5.56 NATO
Capacity: 20 Rounds
Body Material: Aluminum
Spring Material: High Tensile Steel Wire
Follower Material: Polymer
Follower Color: Black
Anti-Tilt Follower
Moly Treated
Color: Black Nitride Finish
Fits:
Standard AR-15 Lower Receiver
Tweet |
Specifications and Features:
- Colt SP62103RP
- AR-15 Magazine
- .223 Remington/5.56 NATO
- 20 Rounds
- Aluminum
- Gray Finish
Tweet |
Features and Specifications:
Manufacturer Number: SP62328
Colt AR-15 .223/5.56 Magazine 30 Rounds Aluminum Gray
Caliber: .223 Remington and 5.56 NATO
Capacity: 30 Rounds
Body Material: Aluminum
Spring Material: High Tensile Wire Spring
Follower Material: Steel
Follower Color: Black
Anti-Tilt Follower
Colt Factory Magazine
Identical to USGI mags
Finish: Matte Gray dry-film finish
Fits:
AR-15 Platform Firearms chambered in .223/5.56
Tweet |
These 19 round DPMS factory magazines are designed specifically for the Panther Long Range Rifles chambered in .243, .260, .308, .338 and 6.5. Designed to meet your demands for durable and dependable magazines, these magazines are made of heat treated 1050 steel with a manganese phosphate finish. Rounding our the features are a steel floor plate, steel spring and steel follower.
Specifications and Features:
DPMS LR-308 Factory Magazine MA-3082
19 Round capacity
.308 Winchester/7.62mm NATO
.243 Winchester
.260 Remington
.338 Federal
6.5 Creedmore
Heat Treated 1050 steel
Manganese phosphate finish
Steel floorplate, spring, and follower
Black
Fits:
DPMS/SR25 pattern rifles
Remington R-25 rifles
Bushmaster Rifles
Fulton Armory Rifles
Tweet |
4 Round Magazine compatible with DPMS .243, .260, .308, .338, 6.5 Creedmoor, Bushmaster 308 rifles, Fulton Armory Rifles, and Remington R-25 rifles.
Tweet |
Tweet |
Tweet |
Tweet |
NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.
Made in U.S.A.
NOTE: Not optimized for use with the PMAG 40 AR/M4 GEN M3 5.56x45 Magazine
Tweet |
While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
FEATURES
True 10-round capacity that does not require limiters, pins, rivets, etc.
Next-generation impact and crush resistant polymer construction
Wide compatibility with non Colt-spec platforms
Anti-tilt follower and constant-curve internal geometry for increased reliability
Long life stainless steel spring
Over-travel insertion stop on the spine
Flared floorplate aids magazine handling and disassembly
Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
Similar to the MOE PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.
In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.
Made in U.S.A.
FEATURES
- Next-generation impact and crush resistant polymer construction
- Modified dimensions allow for wider compatibility with non Colt-spec platforms
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- Long life USGI-spec stainless steel spring for parts commonality
- Over-travel insertion stop on the spine
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
- Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.
Made in U.S.A.
FEATURES
- Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
- Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
- Next-generation impact and crush resistant polymer construction
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- High-quality stainless steel spring for corrosion resistance
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
- Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit
*NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GII design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
To accommodate longer than SAAMI-spec match ammunition, this magazine may not drop free from all makes of lower receivers.
Tweet |
Designed specifically for SAAMI-spec ammunition, the PMAG 25 LR/SR also features transparent MagLevel™ windows to allow rapid visual identification of approximate number of rounds remaining.
Made in U.S.A.
FEATURES
- Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
- Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
- Next-generation impact and crush resistant polymer construction
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- High-quality stainless steel spring, black-oxide coated (MIL-DTL-13924D)
- Anti-glare translucent MagLevel windows on both sides of the body along with a painted indicator on the spring allows for easy determination of rounds remaining from 1 to 25
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
- Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit
*NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GII design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
To accommodate longer than SAAMI-spec match ammunition, this magazine may not drop free from all makes of lower receivers.
Tweet |
FEATURES
Impact and crush resistant all polymer body
Constant-curve internal geometry for smooth feeding
Anti-tilt, self-lubricating follower for increased reliability
Long life stainless steel spring
Ribbed gripping surface and aggressive front and rear texture for positive magazine handling
Paint pen dot matrix panels on the bottom of the body to allow for identification marking
Flared floorplate aids magazine handling and disassembly yet is slim enough for use with most pouches
Tweet |
FEATURES
Next-generation impact and crush resistant polymer construction
Modified dimensions allow for wider compatibility with non Colt-spec platforms
Constant-curve internal geometry for smooth feeding
Anti-tilt, self-lubricating follower for increased reliability
Long life USGI-spec stainless steel spring
Over-travel insertion stop on the spine
Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
Paint pen dot matrix panels on the bottom of the body to allow for identification marking
Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
The PMAG® 30 AR 300 B GEN M3™ is a purpose-designed magazine for rifles chambered in 300 Blackout®. Since its inception, 300 Blackout shooters have had to use a magazine designed for another cartridge, limiting its ultimate performance and compatibility. One of the nice features of 300 Blackout is the compatibility with 5.56x45mm parts, but with the magazine it is a compromise to do so. Due to the wide variety of projectile weights and profiles potentially decreasing overall reliability, a dedicated 300 Blackout magazine was a logical step for the PMAG line.
In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your 300 Blackout rifle. When using 5.56x45mm mags, the potential to chamber and fire a 300 Blackout round in a 5.56x45mm rifle with catastrophic results requires diligent ammunition management by the shooter. The PMAG 30 AR 300 B’s distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues. Along with optimized 300 Blackout performance, the PMAG 30 AR 300 B brings along all of the GEN M3 features such as our next-generation impact and crush resistant polymer, aggressive front and rear texture, an easily removable slim floor plate, a paint pen dot matrix for marking and identification, and a dust/impact cover.
• The PMAG 30 AR 300 B’s distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG
• Dedicated, purpose-designed magazine for rifles chambered in 300 Blackout
• Optimized internal geometry accommodates the wide variety of bullet profiles used in 300 Blackout cartridges
• Carries forward the physical & performance features of the rest of the GEN M3 line
Blackout is a registered trademark of Advanced Armament Corp.
Tweet |