AR15 AR10 Magazines
Hope to see you soon,
Fred Emerson III
Owner
Tweet |
NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.
Made in U.S.A.
NOTE: Not optimized for use with the PMAG 40 AR/M4 GEN M3 5.56x45 Magazine
Tweet |
Driven by the spirit of innovation that began more than 38 years ago, Bushmaster has PROVEN itself above all other MSR manufacturers through hard use in competition, in the woods, and on the prairies of America. Engineered with proprietary processes and manufactured to the tightest tolerances, Bushmaster firearms ensure long-lasting service in any application. For unfailing shootability, always use Bushmaster.
The Bushmaster AR-15 Magazine is a standard replacement magazine. This magazine is designed to fit Bushmaster and other AR-15 variant rifles chambered in .223 Remington/5.56 NATO. It holds 20 rounds of ammunition and has an anti-tilt follower. The magazine is made of aluminum and comes in a black finish.
Features and Specifications:
Manufacturer Number: 93304
Bushmaster AR-15 .223/5.56 Magazine 20 Rounds Aluminum Black
Caliber: .223 Remington/5.56 NATO
Capacity: 20 Rounds
Body Material: Aluminum
Spring Material: High Tensile Steel Wire
Follower Material: Polymer
Follower Color: Black
Anti-Tilt Follower
Moly Treated
Color: Black Nitride Finish
Fits:
Standard AR-15 Lower Receiver
Tweet |
Specifications and Features:
- Colt SP62103RP
- AR-15 Magazine
- .223 Remington/5.56 NATO
- 20 Rounds
- Aluminum
- Gray Finish
Tweet |
4 Round Magazine compatible with DPMS .243, .260, .308, .338, 6.5 Creedmoor, Bushmaster 308 rifles, Fulton Armory Rifles, and Remington R-25 rifles.
Tweet |
FAMILY:M&P Series
MODEL:M&P15-22 Magazine
TYPE:Accessory-Magazines
FINISH:Black
CALIBER/GAUGE:22 LR
CAPACITY:25
Tweet |
Features and Specifications:
Manufacturer Number: 5-76239-SS-BM-B-ASC
ASC AR-15 Magazine
Caliber: 7.62X39
Capacity: Five Rounds
Body Materials: .020 gauge 410 Stainless Steel Alloy
Spring Material: Chrome Silicon
Follower Material: Polymer
Baseplate Material: 300 Stainless Steel Alloy
Follower Color: Black
Heat treated for strength and durability.
Chemically treated for corrosion resistance.
Enhanced Anti-Tilt Polymer Followers
Finish: Black Marlube, Matte Black Powder Coated Baseplate
Fits:
AR-15 Platforms
Tweet |
Tweet |
Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.
Made in U.S.A.
FEATURES
- Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
- Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
- Next-generation impact and crush resistant polymer construction
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- High-quality stainless steel spring for corrosion resistance
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
- Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit
*NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GII design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
To accommodate longer than SAAMI-spec match ammunition, this magazine may not drop free from all makes of lower receivers.
Tweet |
These 19 round DPMS factory magazines are designed specifically for the Panther Long Range Rifles chambered in .243, .260, .308, .338 and 6.5. Designed to meet your demands for durable and dependable magazines, these magazines are made of heat treated 1050 steel with a manganese phosphate finish. Rounding our the features are a steel floor plate, steel spring and steel follower.
Specifications and Features:
DPMS LR-308 Factory Magazine MA-3082
19 Round capacity
.308 Winchester/7.62mm NATO
.243 Winchester
.260 Remington
.338 Federal
6.5 Creedmore
Heat Treated 1050 steel
Manganese phosphate finish
Steel floorplate, spring, and follower
Black
Fits:
DPMS/SR25 pattern rifles
Remington R-25 rifles
Bushmaster Rifles
Fulton Armory Rifles
Tweet |
Our magazines are manufactured 100% start to finish in the USA using .020 gauge 410 Stainless Steel Alloy, heat treated for superior strength and lasting endurance. Our magazines are chemically treated for corrosion resistance [ref QQ-P-35] and coated with our proprietary finish, Marlube which is a wear-in not wear-off coating that burnishes into the surface providing self-lubricating properties. The interior dimensions of OAL 2.316 .002 are perfect for reloads. From first to last rounds feed flawlessly through our 7.62x39 magazines the proof is when you squeeze the trigger.
Features and Specifications:
Manufacturer Number: 7.62x30RD-SS
Chrome Silicon Springs
Enhanced Anti-tilt Polymer Followers
300 Series SS Floor plate- Powder coated Matte Black
Tweet |
This is a factory magazine from Smith & Wesson for the M&P10 AR-10 style rifle. It is manufactured to S&W's strict specifications to ensure perfect fit and reliable function. Don't settle for copies! Insist on genuine S&W magazines for your S&W rifle.
Features and Specifications:
Manufacturer Number: 432180000
Smith & Wesson M&P10 .308 Win. Magazine 5 Rounds Aluminum Black
Caliber: .308 Winchester and 7.62 NATO
Capacity: 5 Rounds
Body Material: Aluminum
Spring Material: High Tensile Spring Steel
Follower Material: Polymer
Follower Color: Black
DPMS/SR-25 pattern
Removable baseplate
S&W Factory Magazine
Finish: Black
Fits:
S&W M&P 10
.308 AR rifles that accept DPMS/SR-25 pattern magazines
Tweet |
Features and Specifications:
Manufacturer Number: SP62328
Colt AR-15 .223/5.56 Magazine 30 Rounds Aluminum Gray
Caliber: .223 Remington and 5.56 NATO
Capacity: 30 Rounds
Body Material: Aluminum
Spring Material: High Tensile Wire Spring
Follower Material: Steel
Follower Color: Black
Anti-Tilt Follower
Colt Factory Magazine
Identical to USGI mags
Finish: Matte Gray dry-film finish
Fits:
AR-15 Platform Firearms chambered in .223/5.56
Tweet |
Due to state regulations this magazine cannot be shipped to California, District of Columbia, Colorado, Connecticut, Maryland, Massachusetts, New Jersey, New York and Hawaii. Parts of Illinois and Indiana also have local restrictions.
Tweet |
Designed specifically for SAAMI-spec ammunition, the PMAG 25 LR/SR also features transparent MagLevel™ windows to allow rapid visual identification of approximate number of rounds remaining.
Made in U.S.A.
FEATURES
- Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
- Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
- Next-generation impact and crush resistant polymer construction
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- High-quality stainless steel spring, black-oxide coated (MIL-DTL-13924D)
- Anti-glare translucent MagLevel windows on both sides of the body along with a painted indicator on the spring allows for easy determination of rounds remaining from 1 to 25
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
- Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit
*NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GII design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
To accommodate longer than SAAMI-spec match ammunition, this magazine may not drop free from all makes of lower receivers.
Tweet |
While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
Similar to the MOE PMAG, the GEN M3 Window features a long-life USGI-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.
In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.
Durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevel™ system provides positive verification without affecting the durability or reliability of the magazine.
Made in U.S.A.
FEATURES
- Next-generation impact and crush resistant polymer construction
- Modified dimensions allow for wider compatibility with non Colt-spec 'STANAG 4179' platforms
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- Long life USGI-spec stainless steel spring, black-oxide coated (MIL-DTL-13924D)
- Anti-glare translucent MagLevel windows on both sides of the body along with a painted indicator on the spring allows for
easy determination of rounds remaining from 1 to 30 - Over-travel insertion stop on the spine
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
- Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
FEATURES
Next-generation impact and crush resistant polymer construction
Modified dimensions allow for wider compatibility with non Colt-spec platforms
Constant-curve internal geometry for smooth feeding
Anti-tilt, self-lubricating follower for increased reliability
Long life USGI-spec stainless steel spring
Over-travel insertion stop on the spine
Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
Paint pen dot matrix panels on the bottom of the body to allow for identification marking
Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
The next-generation PMAG 40 GEN M3 is a 40-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.
While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
The PMAG 40 GEN M3 features a long-life stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.
In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.
Made in U.S.A.
FEATURES
- Next-generation impact and crush resistant polymer construction
- Modified dimensions allow for wider compatibility with non Colt-spec platforms
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- Long life stainless steel spring
- Over-travel insertion stop on the spine
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
- Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |