AR AK Acc, Tools, & Parts
Hope to see you soon,
Fred Emerson III
Owner
FOR MAGAZINES CLICK HERE
- ALL QTY'S ARE SET AT ONE (If in stock) REGARDLESS OF QTY IN STOCK
Light weight, cost-effective vertical fore grip
Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting.
Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.
Made in the USA.
Tweet |
A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
- Two water-resistant battery storage tubes located on the left and right sides of the stock
- Each tube will store up to two (2) CR123A lithium or AA batteries
- Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
- Supplemental friction lock minimizes accuracy robbing wobble*
- Premium chrome-silicon lock spring provides positive locking and long service life
- Sloping cheek weld provides a wide contact surface for user comfort
- Shielded release latch prevents snagging and accidental operation
- Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
- Rear/Bottom – 1.25" sling loops
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec STR
SPECIFICATIONS**
STR Carbine Stock, Commercial-Spec
- Weight: 12.3 oz.
- Weight, w/receiver extension: 16.3 oz.
- Length, max: 7.3 in.
- Width, max: 2.6 in.
- LOP Adjustment Range: 3.8 in.
- LOP, M4 Collapsed: ~10.9 in.
- LOP, M4 Extended: ~14.7 in.
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
- Two water-resistant battery storage tubes located on the left and right sides of the stock
- Each tube will store up to two (2) CR123A lithium or AA batteries
- Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
- Supplemental friction lock minimizes accuracy robbing wobble*
- Premium chrome-silicon lock spring provides positive locking and long service life
- Sloping cheek weld provides a wide contact surface for user comfort
- Shielded release latch prevents snagging and accidental operation
- Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
- Rear/Bottom – 1.25" sling loops
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial-Spec STR
Tweet |
Two-piece covers for 1913 Picatinny rail
The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, the Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables.
The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allow for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail.
Made in the USA.
Tweet |
FEATURES
-The "Right Tool" to install a Single-Point sling adapter plate
-Three lugs to fit buffer tube castle nut
-Adequate torque energy to install castle nut
-Safely remove buffer tube castle nut
-Soft, easy to grip handle
-Dark gray phosphate finish
-Tuff-Steel construction
Tweet |
Black finish
Push button allows easy selection of position
Secure watertight storage compartment
Battery Sled
Flat non-slip bottom surface
Product Description
A textured vertical grip that deploys in either a vertical or horizontal position and provides a positive grip surface. Allows the support hand to apply rearward pressure keeping the weapon shouldered" yielding better muzzle control and accuracy.
Specifications
UPC 676315024903
Manufacturer Mission First Tactical
Manufacturer Part # RFG
Model Folding
Model React
Type Grip
Color Black
Description Vertical Pistol Grip
Fit Picatinny
Tweet |
Slide-on replacement for collapsible butt stock
Angled non-slip rubberized removable buttpad allows faster presentation
Multiple Sling Slots with single point mount points
Quick Detach Sling mounting point is positioned in the rear
Upper section provides enhanced cheek weld
Single MLOK connection point
Modular Buffer Tube Plunger System
reinforced with a metal chassis
Product Description
A robust stock capable of withstanding long term abuse delivered by larger caliber firearms such as tactical shotguns of 12 gauge or 7.62X51 AR-10 while remaining nimble enough for use on a 5.56.
Specifications
UPC 814002024335
Manufacturer Mission First Tactical
Manufacturer Part # BMSMIL-EXD
Type Stock
Color Black
Subcategory Stocks & Buffer Tubes
Tweet |
Black finish
Slide-on replacement for collapsible butt stock
MilSpec Buffer Tube
Angled non-slip rubberized buttpad
Fits AR rifles
Product Description
All of the functional requirements are met while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and accepts a new optimized sling configuration. The lightest stock of its kind in the market.
Specifications
UPC 676315025856
Manufacturer Mission First Tactical
Manufacturer Part # BMSMIL
Model Battlelink
Model Minimalist
Type Stock
Color Black
Description M4 Collapsible Stock
Fit AR Rifles
Size Mil Spec
Tweet |
- Mounting hardware included
- Will fit AR series handguards with large or small holes
- Hard coat anodized 6061 aluminum construction
- In most circumstances you will be able to use standard heat shields after installation
Tweet |
(Will not fit Century Arms or Yugo M70 with Side Rail)
Elite Defense QD system for repeat zero locking
6061 aluminum construction
Product Description
Railed scope mount for AK type rifles that attaches to the side mounting system" made by Midwest Industries.
Specifications
UPC 816537012030
Manufacturer Midwest Industries
Manufacturer Part # MI-AKSM
Model Railed Scope Mount
Type Mount System
Color Black
Fit AK
Subcategory Bases
Tweet |
Constructed of 6061 aluminum
Hard coat anodized to provide a lifetime of service
Product Description
Heavy duty quick detach front sling mount made by Midwest Industries.
Specifications
UPC 816537011880
Manufacturer Midwest Industries
Manufacturer Part # MCTAR-08HD
Model Front Sling Adapter
Model Heavy Duty
Type Sling Mount
Color Black
Fit Picatinny
Description Quick Detach
Subcategory Sling Hardware
Tweet |
Made in the USA
FEATURES
-Precision machined from stress-proof steel
-Square notches that engage the sight with a precise fit to give the operator precise sight adjustment
-A knurled non-slip handle with a lanyard hole for a lifetime of convenient operation
Tweet |
Quick Detach End Plate Sling Adapter for 4-position or 6-position CAR/M4 Stock
Work well in all types of configurations, including single point, two point or three point tactical slings
Easy, no gunsmith installation, no need for special tools or removal of buffer tube
Constructed of 6061 aluminum and hard coat anodized for a lifetime of service
Tweet |
Brand Midwest Industries
Category Other Tools
Series Removal Tool
Model Handguard
Material Metal
Firearm Type AR Platform
Tweet |
Black finish
Contoured finger swells allow a firm grip even with gloved hands
Secure watertight storage compartment
Picatinny mounted vertical grip
Product Description
Full fist-sized textured vertical grip with finger swells that provides a positive grip surface. This grip allows the support hand to apply rearward pressure to keep the weapon shouldered to enhance muzzle control and accuracy.
Specifications
UPC 676315024897
Manufacturer Mission First Tactical
Manufacturer Part # REG
Model Ergonomic
Model React
Type Grip
Color Black
Description Vertical Pistol Grip
Fit Picatinny
Subcategory Grips
Tweet |
Black finish
Designed for M16/M4/AR15/HK416
Secure watertight storage compartment
Will not interfere with magazine
Product Description
The React Magwell Grip is a compact textured vertical grip designed for close handhold application at the low ready or CQB situations. Locates support hand forward of the magazine well to prevent injury if an overcharged round causes the ejection of the magazine. Right and left handed pressure pad wells for wired switches and spare battery storage compartment. Allows the support hand to apply rearward pressure keeping the weapon shouldered" yielding better muzzle control and accuracy.
Tweet |
Barrel Wrench for GI Barrel Nut
A1 & A2 Flash Suppressor wrenchs
Older Single Pin and the newer M4 Collapsable Stock Castle Nut wrenchs
Flat Blade Screw Driver
1/2" Drive Ratchet Compatible
Steel Construction
Length: 12.7"
Weight: 20.2 oz
NcSTAR Patented Design: US Pat. # D598,723
Tweet |
Model VISM
Series 1 Point Sling
Material Nylon Strap w / Elastic Shock-Cord
Design Adjustable Bungee
Hardware QD Push Button Swivel
Width 1.50"
Color Black
Tweet |