AR AK Acc, Tools, & Parts

Magpul STR AR Carbine Stock Commercial-Spec - The Magpul STR (Storage/Type Restricted) is a drop-in replacement buttstock for AR15/M4 carbines using commercial-spec sized receiver extension tubes. A storage-capable version of the CTR®, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design.

A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in U.S.A.
 

FEATURES

• Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
• Two water-resistant battery storage tubes located on the left and right sides of the stock
  • Each tube will store up to two (2) CR123A lithium or AA batteries
  • Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
• Supplemental friction lock minimizes accuracy robbing wobble*
• Premium chrome-silicon lock spring provides positive locking and long service life
• Sloping cheek weld provides a wide contact surface for user comfort
• Shielded release latch prevents snagging and accidental operation
• Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
• Sling Mounts
  • Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
  • Rear/Bottom – 1.25" sling loops

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec STR

SPECIFICATIONS**

STR Carbine Stock, Commercial-Spec

• Weight: 12.3 oz.
• Weight, w/receiver extension: 16.3 oz.
• Length, max: 7.3 in.
• Width, max: 2.6 in.
• LOP Adjustment Range: 3.8 in.
• LOP, M4 Collapsed: ~10.9 in.
• LOP, M4 Extended: ~14.7 in.

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.

Tweet

Magpul STR AR Carbine Stock Mil-Spec - The Magpul STR (Storage/Type Restricted) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A storage-capable version of the CTR®, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design.

A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in U.S.A.
 

FEATURES

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
• Two water-resistant battery storage tubes located on the left and right sides of the stock
  • Each tube will store up to two (2) CR123A lithium or AA batteries
  • Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
• Supplemental friction lock minimizes accuracy robbing wobble*
• Premium chrome-silicon lock spring provides positive locking and long service life
• Sloping cheek weld provides a wide contact surface for user comfort
• Shielded release latch prevents snagging and accidental operation
• Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
• Sling Mounts
  • Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
  • Rear/Bottom – 1.25" sling loops

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial-Spec STR

Tweet

The M-LOK GI Sling Swivel is a traditional sling swivel loop for M-LOK compatible systems.

Its base is machined from Mil-Spec anodized aluminum and utilizes a coated steel loop, which accepts up to 1-1/4” webbing. With its compact and low profile design, it provides a minimal footprint, creating more hand guard real estate. Like any other Magpul M-LOK accessory, the M-LOK GI Sling Swivel features recoil / impact mitigation lugs and cammed T-Nuts for proper M-LOK engagement.

Made in the USA.

Tweet

Magpul Industries, M-LOK Paraclip Sling Mount, Fits M-LOK Compatible Hand Guards And Forends, Black Finish

    Mounts to M-LOK compatible hand guards and clip-style sling attachments
    Durable steel construction

Product Description

The M-LOK Paraclip Sling Mount is a steel clip-in sling mount for M-LOK compatible systems. It is constructed of high-grade, precision cast steel and has an extremely durable Melonite finish. With a low-profile and snag-free design it fits a wide range of clips, including the Magpul Paraclip. Made in U.S.A.

Specifications
UPC    873750002859     
Manufacturer    Magpul Industries
Manufacturer Part #    MAG607     
Model    M-LOK Paraclip
Type    Sling Mount     
Color    Black
Fit    M-LOK     
Description    M-LOK Paraclip Sling Mount
Subcategory    Sling Hardware

Tweet

Bravo Company, BCMGUNFIGHTER, Kinesthetic Angled Grip, Black, MLOK Compatible

    Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard

Product Description

Bravo Company's BCMGUNFIGHTER KAG-MCMR Kinesthetic Angled Grip" M-Lok compatible" is the end result of collaboration between BCM(R) and Travis Haley" founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.
Designed to complement modern shooting grips" the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist" elbow" and shoulder" allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back" the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions. Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support and works as a rest for supported firing positions.

Specifications
UPC    812526021687     
Manufacturer    Bravo Company
Manufacturer Part #    BCM-KAG-MCMR-BLK     
Model    Kinesthetic Angled Grip
Type    Grip     
Color    Black
Description    Kinesthetic Angled Grip     
Fit    MLOK Compatible

Tweet

Magpul Industries, Quick Detach Sling Swivel, Black

    Push-button quick-detach sling swivel for 1-1/4" webbing
    Compatible with QD sling attachment points
    Manganese-phosphate finished steel

Product Description

Push-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for two to one-point convertible sling. Made in U.S.A.

Specifications
UPC    873750010854     
Manufacturer    Magpul Industries
Manufacturer Part #    MAG540     
Model    QD
Model    Sling Swivel     
Type    Swivel
Color    Black     
Subcategory    Sling Hardware

Tweet

Magpul Industries, Rail Sling Attachment, Quick Detach Sling Mount, Fits Picatinny, Black

    Made in the U.S.A.
    Steel construction
    Ambidextrous

Product Description

The RSA QD provides a forward attachment point for the Magpul MS4(R) Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.

Specifications
UPC    873750008653     
Manufacturer    Magpul Industries
Manufacturer Part #    MAG337     
Model    RSA- Rail Sling Attachment
Model    QD     
Type    Sling Mount
Color    Black     
Fit    Picatinny
Accessories    QD Sling Cups     
Subcategory    Sling Hardware

Tweet

Bravo Company, Kinesthetic Angled Grip, Picatinny, Black

    Forward rake gives positive retention when using "C-clamp" method of handguard support
    Works as a rest for supported firing positions
    Small profile

Product Description

Bravo Company's BCMGUNFIGHTER KAG-1913 Kinesthetic Angled Grip" Picatinny 1913 Rail Version" is the end result of collaboration between BCM(R) and Travis Haley" founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.
Designed to complement modern shooting grips" the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist" elbow" and shoulder" allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back" the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions. The new Patent Pending BCM(R) Direct Mount Picatinny 1913 interface system" was developed to be the most rigid" light-weight" and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. BCM(R) has developed a patent pending anchor system that not only secures to the mounting surface" but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM(R) direct mount interface system reduces those issues and offers a more secure lockup" eliminating play in the mounting surface.

Specifications
UPC    812526020239     
Manufacturer    Bravo Company
Manufacturer Part #    BCM-KAG-1913-BLK     
Model    Picatinny
Model    Kinesthetic Angled Grip     
Type    Grip
Color    Black    

Tweet

Magpul Industries, M-LOK Bipod Mount, Fits M-LOK Hand Guards, Black Finish

    Low profile M-LOK bipod mounting solution
    Mil-spec anodized aluminum
    Beveled ends and corners

Product Description

The Magpul M-LOK Bipod Mount allows for the attachment of Harris(R)-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is also compatible with other accessories that attach to traditional sling studs. Machined from milspec-anodized aluminum, the M-LOK Bipod Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Max overall length of 2.33 in. Made in U.S.A.

Specifications
UPC    873750004488     
Manufacturer    Magpul Industries
Manufacturer Part #    MAG609     
Model    M-LOK Bipod Mount
Type    Accessory     
Color    Black
Fit    M-LOK Hand Guard     
Subcategory    Bipods

Tweet

Bravo Company, BCMGUNFIGHTER, Vertical Grip, Mod 3, Black, MLOK Compatible

    M-LOK compatible
    Low-profile length
    A lightweight design at 1.9 ounces

Product Description

Bravo Company's BCM Gunfighter's Vertical Grip MOD 3 is M-Lok compatible. It has a low-profile length for increased mobility and decreases "snag" factor. The forward angle increases the rigidity of the forearm while providing a more natural wrist angle. It can be mounted in reverse angle to increase your control when grabbing the handguard and grip. The flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. It is manufactured from high quality" impact resistant polymers. Made in the USA.

Specifications
UPC    812526021595     
Manufacturer    Bravo Company
Manufacturer Part #    BCM-VG-MCMR-MOD-3-BLK     
Model    Vertical Grip
Model    BCM Gunfighter     
Model    Vertical Forend Grip
Type    Grip     
Color    Black
Fit    MLOK Compatible

Tweet

Blue Force Gear, Sling, Molded Acetal Adjuster, No Quick Release, Attached with TriGlide instead of Loop Lock, 2-Point Padded Combat Sling, Black

    2.00" tubular webbing with closed cell foam
    Invista solution dyed CORDURA(R) webbing
    ITW GhilleTex(TM) Acetal hardware - a military grade" low IR plastic

Product Description

While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear,s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world's standard Vickers Combat Applications Sling(TM), a RED(TM) Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221(TM) Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket.

Specifications
UPC    814520015266     
Manufacturer    Blue Force Gear
Manufacturer Part #    VCAS-200-OA-BK     
Model    No Quick Release Attached with TriGlide instead of Loop Lock
Model    Molded Acetal Adjuster     
Type    Sling
Color    Black     
Description    2-Point Combat Sling
Accessories    Padded     
Subcategory    Slings

 

Tweet

Blue Force Gear, Mount, HK Hook, Fits 1"" Webbing, Black"

    Black finished steel

Product Description

Sling Snap Hooks are fast" secure sling attachment hardware that allows quick installation and removal of any sling they are attached too. The Sling Snap Hook has a 1" sling slot.

Specifications
UPC    814520014535     
Manufacturer    Blue Force Gear
Manufacturer Part #    P-HK-100     
Type    Mount
Color    Black    

Tweet

MASH Hook

Features

MASH Hooks are an excellent alternative to HK Hooks and provide a secure and fast sling connection for weapons with larger eyelets such as AKs.  The MASH Hook is activated by squeezing the center tabs together which opens the gate for installation and removal from eyelets.

Install with an Elastic Hook Cover to minimize noise and protect the weapon finish. (Sold separately)

As with all Blue Force Gear, it is made with excellence in the USA and carries a limited lifetime warranty.


Applications

Fits:

    Sling connections for weapons with larger eyelets such as AK type weapons.

Tweet

Blue Force Gear, Mount, Fit Universal Wire Loop, Black

    Do not install UWLs around the buffer tube of M4s as this may interfere with the operation of the charging handle

Product Description

The Universal Wire Loop is one of the most versatile sling attachment points made. A flexible nylon coated stainless steel wire allows for a sling attachment through eyelets" loops" slots" or any other opening that the wire fits through. The sling loop body is CNC machined from 6061-T6 aluminum billet before being tumbled and bead-blasted for a non-reflective surface. The loop is hard-coat anodized before the nylon coated stainless steel aircraft-grade cable is installed with ball-shank ends. The result is a sling adapter with limitless uses. Cable outer coating may deform if subjected to extreme barrel heat but the stainless core will not melt. Universal Wire Loops are quieter and stronger than traditional hook attachments and won't wear through eyelets.

Specifications
UPC    814520013040     
Manufacturer    Blue Force Gear
Manufacturer Part #    UWL-325-BK     
Type    Mount
Color    Black     
Subcategory    Sling Hardware

Tweet

Blue Force Gear, Sling, Molded Acetal Adjuster, No Quick Release, Attached with TriGlide instead of Loop Lock, 2-Point Combat Sling, Black

    1.25" webbing on both ends secured with included triglides
    Fits standard M4 carbines and other carbines and rifles

Product Description

The Patent Pending Vickers Combat Applications Sling(TM) has revolutionized the way we carry automatic rifles. Developed with industry friend" expert" and former 1st SFOD-Delta operational member Larry Vickers and author of the Vickers Guide series of firearms books" the Vickers Sling(TM) incorporates key features from real world experience that makes the two point sling effective and durable - the choice tactical sling requested by name. The Vickers Sling(TM) has been Blue Force Gear's most popular product of all" with service in every branch of service here at home as well as several foreign militaries" making it the clear choice of AR-15 slings. Able to quickly transition from carrying a slung rifle comfortably to combat ready" the patent pending Quick Adjuster has bridged the gap between the two primary uses of weapon slings - from transporting to fighting. All Vickers Slings(TM) are built with precision and pride right here at home in the US with superior materials.

Specifications
UPC    814520015228     
Manufacturer    Blue Force Gear
Manufacturer Part #    VCAS-125-OA-BK     
Model    No Quick Release Attached with TriGlide instead of Loop Lock
Model    Molded Acetal Adjuster     
Type    Sling
Color    Black     
Description    2-Point Combat Sling

Tweet

The Burris AR-P.E.P.R. Quick Detachable Mount is perfect for mounting your scope forward on your AR-style rifle. The Proper Eye Position Ready (P.E.P.R.) Mount provides 2" of forward scope positioning room which will allow you to obtain proper eye relief and maintain a proper shooting position. Choose between the permanent attachment style or the quick detach option which allows you to quickly remove and replace your optic. Includes both smooth and picatinny ring tops.

 

* 34mm model features 20 MOA elevation built in.

Technical Information:
Height A (from rail to bottom of scope ring):

    1" = 1.0"
    30mm = 1.0"
    34mm = 0.68"

Width B (rings):

    1" = 1.57"
    30mm = 1.75"
    34mm = 1.90"

Height C (from rail to middle of scope rings):

    1" = 1.5"
    30mm = 1.6"
    34mm = 1.35"

Length D (front of front ring to back or rear ring):

    1" = 4.15"
    30mm = 4.15"
    34mm = 4.92"

Length E (between rings):

    1" = 2.15"
    30mm = 2.15"
    34mm = 2.9"

Tweet

Bushmaster Complete AR Lower Parts Kit - One of the most important purchases that one can make when building an AR-15 rifle is a good, quality lower parts kit. Known for quality, the Bushmaster lower parts kit is one of the most highly regarded kits on the market thanks to a long standing reputation for excellence. Everything you need to complete your lower receiver with the exception of the receiver extension, buffer and buffer spring. All needed springs, pins, and parts are included and are finished to proper military specifications. Includes a standard A2 style pistol grip, and a trigger guard.

Features and Specifications:
Manufacturer Number: 93384
Bushmaster AR-15 Lower Parts Kit Mil Spec Black
Includes everything necessary to completely build up lower receiver
Packaged in clampack
Made In The USA
Color: Black

Fits:
Mil-Spec AR-15 Lower Receiver

Tweet

CMMG Complete AR Lower Parts Kit - CMMG is one of the top companies in the AR-15 game. With the CMMG AR-15 complete lower receiver parts kit, you will get everything you need to finish off your stripped lower receiver. Sets of parts are separated into color-coded bags and come along with directions to make assembly easy even for beginners. Don't settle for a lesser quality parts kit that might fail at any time; the CMMG lower parts kit is ready for the toughest conditions.

Features and Specifications:
Manufacturer Number:55CA6C5
AR-15 Complete Lower Parts Kit
Finish: Black

Includes:
Pistol Grip
Fire Controls And Pins
Standard Trigger

Fits: AR-15 Lower Receivers

Tweet