View All Holsters
Hope to see you soon,
Fred Emerson III
Owner
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
If you have a MD-1 gun below with a front mounted light or laser please order our MD-2 in accomodate light or laser.
THE MD-1 STICKY HOLSTER FITS THE FOLLOWING GUNS:
Model Name | Caliber | Barrel |
Accu-Tek AT-380 II | 380ACP | 2.8 |
Accu-Tek HC-380 | 380ACP | 2.8 |
AMT Backup | 40S&W | 3.125 |
AMT Backup | 9MM | 3 |
AMT Backup Glock 42 |
45ACP 380ACP |
3 3 |
Kel-Tec P-11 | 9MM | 2.9 |
Kel-Tec P40 | 40S&W | 3.1 |
Kel-Tec PF9 | 9MM | 3.1 |
Ruger LC9 | 9MM | 3.12 |
SCCY CPX-1 | 9MM | 3.1 |
Sig Sauer P290 | 9MM | 2.9 |
Taurus 709 | 9MM | 3 |
Taurus 708 | 380ACP | 3.20 |
Taurus 740 | 40S&W | 3.20 |
Cobra Patriot .380 | 380ACP | 3.3 |
Cobra Patriot 9 | 9MM | 3.3 |
Kahr PM40 | 40S&W | 3.0 |
Kahr PM9 | 9mm | 3.0 |
Kahr CM9 | 9mm | 3.0 |
Kimber Solo | 9MM | 2.7 |
Bond Arms Snake Slayer | 44Colt | 3.5 |
Smith and Wesson Sigma 380 | 380 | 3.0 |
Sig Sauer P938 | 9mm | 3.1 |
Smith and Wesson 2214 | 22LR | 3.0 |
Tweet |
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
THE MD-2 STICKY HOLSTER FITS THE FOLLOWING GUNS:
Model Name | Caliber | Barrel |
American Derringer LM4 Slimmerling | 45ACP | 2 |
Beretta Nano | 9MM | 3.07 |
Beretta PX4 Storm Sub Compact | 9MM, 40 S&W | 3 |
Boberg XR9 | 9MM | 3.35 |
Springfield Armory XD-S | 45 acp | 3.3 |
Smith and Wesson Shield | 9mm/40 | 3.1 |
Smith and Wesson Chief Special | 9mm | 3 |
Smith and Wesson Chief Special | 45 | 3.25 |
Springfield Armory XD Sub-Compact | 40 | 3 |
Springfield Armory XD MOD 2 | 9/40 | 3 |
Sig Sauer P290 | 9MM | 2.9 |
Ruger LC9 | 9MM | 3.12 |
Glock 42 with front mounted laser Also any MD-1 gun with a front mounted laser |
Tweet |
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
THE MD-3 STICKY HOLSTER FITS THE FOLLOWING GUN MODELS
Model Name | Caliber | Barrel |
Beretta Cheetah | 380ACP | 3.82 |
Browning 1911-380 Black Label Compact | 380ACP | 3.62 |
Browning BDA | 380ACP | 3.8 |
Colt Goverment MK-IV Model 80 | 380ACP | 3.25 |
CZ-USA 82 | 9mm/380ACP | 3.8 |
Remington R51 | 9mm | 3.4 |
Sig Sauer P232 | 380ACP | 3.6 |
Walther PPKS | ALL | 3.35 |
Walther PPK | ALL | 3.3 |
Interarms EPK | 380ACP | 3.35 |
Star, S.A. Firestar Plus | 9MM | |
Sterling Arms Mark II | 380ACP | 3.5 |
Bersa Thunder 380 | 380ACP | 3.5 |
Bersa Thunder 380 CC | 380ACP | 3.2 |
Bersa Thunder 380 Plus | 380ACP | 3.5 |
Bersa Firestorm .380 | 380ACP | 3.5 |
Bersa Firestorm .22 LR | 22LR | 3.5 |
Browning BDA 380 | 380ACP | 3.8 |
Norinco Model 59 (Macarov) | 9x18mm | |
Simson Suhl V series Macarov 9x18 | 9x18mm | |
Miltex Makarov Special Edition | 9x18mm | |
CZ-USA 82 | ALL | |
Colt Government MK-lV Model 80 | 380ACP | 3.25 |
Sig Sauer P230 | ALL | 3.6 |
Kahr P9 | 9mm | 3.6 |
Kahr CW 9 | 9mm | 3.5 |
Tweet |
If you have a front rail mounted laser choose our MD-4 modified for laser holster.
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
THE MD-4 STICKY HOLSTER FITS THE FOLLOWING GUNS
Model Name | Caliber | Barrel |
Bersa Thunder 9 UC | 9MM | 3.25 |
Bersa Thunder Pro 40 UC | 40 S&W | 3.25 |
Bersa Thunder Pro 45 UC | 45 S&W | 3.6 |
Bersa Thunder Pro 9 UC | 9mm | 3.25 |
Walther PPS | All | 3.2 |
Kahr CW 45 | 45ACP | 3.6 |
Kahr CW 40 | 40S&W | 3.6 |
Kahr CW 9 | 9MM | 3.6 |
Kahr P9 | 9mm | 3.6 |
Glock 43 | 9mm | 3.39 |
Sig Sauer P239 | 9mm,.357 SIG, 40 S&W | 3.6 |
Smith and Wesson Shield | 9mm, 40 cal | 3.1 |
Smith and Wesson Shield | 45 ACP | 3.3 |
Springfield Armory EMP | ||
Springfiel Armory XD-S | 9mm, 40 cal, 45ACP | 3.3 |
Springfield XDS 3.3 |
||
Walther CCP | ALL | |
Walther PK380 | 380ACP | |
Walther P22 (3.42 in barrel) | 22LR | |
Walther PPS M2 | 9mm | 3.18 |
Tweet |
Ambidextrous fit for right and left handed users.
If you have a front rail mounted laser choose our MD-4 Gen 1 modified for laser.
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
THE MD-4 Gen 1 STICKY HOLSTER FITS THE FOLLOWING GUNS:
Model Name | Caliber | Barrel |
Taurus PT 111/140 | 9MM | |
Bersa BP9CC | 9mm | |
Beretta Px4 Storm Sub-Comp | ALL | |
FN Compact | 9mm/ .40 | |
Ruger SR9c | 9MM | 3.5 |
Springfield Armory Micro Combat | ALL | |
Heckler & Koch P30SK | 9mm/ .40 | |
Glock G26 | 9MM | 3.48 |
Glock G27 | 40S&W | 3.48 |
Glock G28 | 380ACP | 3.46 |
Glock G33 | 357 SIG | 3.46 |
Glock G36 | 45ACP | 3.78 |
Glock G39 | 45GAP |
3.46 |
Glock G29 |
10mm |
3.46 |
Heckler & Koch P7 | 9MM | 4.1 |
Smith and Wesson 6906 | 9MM | |
Smith and Wesson M&P Compact | 9mm/.40/ .45ACP | |
Taurus Millennium Pro | All | |
Ruger SR22 | All | |
Ruger SR40c | All |
Tweet |
If you have a front rail mounted laser choose our MD-4 modified for laser holster.
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
THE MD-4 MODIFIED STICKY HOLSTER FITS THE FOLLOWING GUNS
Model Name | Caliber | Barrel |
Bersa Thunder 9 UC | 9MM | 3.25 |
Bersa Thunder Pro 40 UC | 40 S&W | 3.25 |
Bersa Thunder Pro 45 UC | 45 S&W | 3.6 |
Bersa Thunder Pro 9 UC | 9mm | 3.25 |
Walther PPS | All | 3.2 |
Kahr CW 45 | 45ACP | 3.6 |
Kahr CW 40 | 40S&W | 3.6 |
Kahr CW 9 | 9MM | 3.6 |
Kahr P9 | 9mm | 3.6 |
Glock 43 | 9mm | 3.39 |
Sig Sauer P239 | 9mm,.357 SIG, 40 S&W | 3.6 |
Smith and Wesson Shield | 9mm, 40 cal | 3.1 |
Smith and Wesson Shield | 45 ACP | 3.3 |
Springfield Armory EMP | ||
Springfiel Armory XD-S | 9mm, 40 cal, 45ACP | 3.3 |
Springfield XDS 3.3 |
||
Walther CCP | ALL | |
Walther PK380 | 380ACP | |
Walther P22 (3.42 in barrel) | 22LR | |
Walther PPS M2 | 9mm | 3.18 |
Tweet |
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
THE MD-5 STICKY HOLSTER FITS THE FOLLOWING GUNS:
Model Name | Caliber | Barrel |
Ruger LCR | ALL | 1.875 |
Ruger SP101 Snub Nose | ALL | 1.8 |
Taurus 85 | 38SPL | 2 |
Smith and Wesson 642 | 38SPL | |
Smith and Wesson 638 | 38SPL | |
Colt Agent | 38SPL | 2 |
Colt Cobra | 38SPL | 2 |
Colt Detective Special | 38SPL | 2 |
Bersa Firestorm .38 | 38SPL | 2 |
Smith and Wesson 36 | 38SPL | 1.875 |
Smith and Wesson 37 | 38SPL | 1.875 |
Smith and Wesson 60 | 38SPL | 2.125 |
Cobra Shadow | 38SPL | 1.875 |
Taurus 605 | 357MAG | 2 |
Taurus 617 | 357MAG | 2 |
Taurus 650 | 357MAG | 2 |
Taurus 731 | 32MAG | 2 |
Taurus 817 | 38SPL | 2 |
Taurus 850 | 38SPL | 2 |
Taurus 941 | 22MAG | 2 |
Smith and Wesson 12 | 38SPL | 2 |
Smith and Wesson 340PD | 38SPL | 1.875 |
Smith and Wesson Bodyguard revolver | 38SPL | 1 7/8 |
Charter Arms Pink Lady | 38SPL | 1 7/8 |
Charter Arms J frame 5 shot revolver | 38SPL | less than |
Smith and Wesson 640 | 38/357 | 2.25 |
J-Frame and similar revolvers to 2.25" barrel.J-Frame and similar revolvers to 2.25" barrel.
Tweet |
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
THE SM-2 STICKY HOLSTER FITS THE FOLLOWING GUNS:
Model Name | Caliber | Barrel |
Diamonback DB9 | 9MM | 3 |
Kel-Tec P32 | 32ACP | 2.7 |
Kel-Tec P3AT | 380ACP | 2.7 |
North American Arms Guardian | ALL | |
Rohrbaugh R9 | 9MM | 2.9 |
Rohrbaugh 380 | 380ACP | 2.9 |
Ruger LCP | 380ACP | 2.75 |
Taurus 738 | 380ACP | 2.84 |
I.O. Inc. Hellcat 380 | 380ACP | 2.75 |
Taurus 22 | 22LR | 2.75 |
Taurus 25 | 25ACP | 2.75 |
Taurus 738 TCP | 380ACP | 2.84 |
Jimenez J.A. 380 | 380ACP | 2.75 |
Jimenez J.A. 25 | 25ACP | 2.5 |
Jimenez J.A. 22 | 22LR | 2.5 |
Smith and Wesson Bodyguard | 380ACP | |
Colt Pony | 380ACP | 2.75 |
Colt Mustang | 380ACP | 2.67 |
Sig Sauer P238 | 380ACP | 2.7 |
Sig Sauer P238 | 380ACP | 2.75 |
Diamonback DB380 | 380ACP | 2.80 |
Kahr P380 | 380 | 2.5 |
Tweet |
THE SM-3 STICKY HOLSTER FITS THE FOLLOWING GUNS:
Model Name | Caliber | Barrel |
Magnum Research Micro Desert Eagle | 380ACP | 2.22 |
Boberg XR9-S | 9MM | 3.35 |
Boberg XR45-S | 45 | 3.75 |
Kimber Pepperblaster | ||
Kahr P380 | 380 | 2.5 |
Taurus Curve | .380 ACP | 2.5 |
Tweet |
Tweet |
This Sticky Travel Mount includes ONE 4"x 6" adhesive strip.
Travel Mount Dimensions:
8" Tall X 5 3/4" Wide
Sticky Travel Mount Application Instructions:
1. Clean and dry surface before application.
2. Peel tape from fastener and press firmly into place.
3. Adhesive reaches maximum strength after 24 hours.
Note: Recommended for temperatures between -30°F to 140°F. Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Adhesive may damage certain types of finish and surfaces in which Sticky Holster Inc. is not responsible for.
Tweet |
Tweet |
Fits: M&P Shield 9/40, Glock 26/27, XDS, and most double stack compact pistols - Right Handed
Tweet |
Fits: M&P Shield 9/40, Glock 26/27, XDS, and most double stack compact pistols - Left Handed
Tweet |
Fits: S&W J Frame, Ruger LCR, S&W Bodyguard 38 - Right Handed
Tweet |
Fits: M&P Shield and most single stack compact - Right Hand
Tweet |
Fits: Most Glock Full size 9mm and 40 s&w double stack Pistols simular to Glock 17 and 22 - Right Hand
Tweet |
Fits: Most 9mm / 40 s&w / 45acp double stack simular to Glock 19 / 23 - RH
Tweet |