Rifle - AR- AK Magazines
Hope to see you soon,
Fred Emerson III
Owner
Tweet |
While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
Similar to the MOE PMAG, the GEN M3 Window features a long-life USGI-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.
In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.
Durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevel™ system provides positive verification without affecting the durability or reliability of the magazine.
Made in U.S.A.
FEATURES
- Next-generation impact and crush resistant polymer construction
- Modified dimensions allow for wider compatibility with non Colt-spec 'STANAG 4179' platforms
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- Long life USGI-spec stainless steel spring, black-oxide coated (MIL-DTL-13924D)
- Anti-glare translucent MagLevel windows on both sides of the body along with a painted indicator on the spring allows for
easy determination of rounds remaining from 1 to 30 - Over-travel insertion stop on the spine
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
- Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
High-tension spring design, hardened steel with anti-corrosion heat treat.
Base/Locator/Follower are precision molded ABS polymer.
Tweet |
Tweet |
Specifications and Features:
- Colt SP62103RP
- AR-15 Magazine
- .223 Remington/5.56 NATO
- 20 Rounds
- Aluminum
- Gray Finish
Tweet |
FEATURES
Next-generation impact and crush resistant polymer construction
Modified dimensions allow for wider compatibility with non Colt-spec platforms
Constant-curve internal geometry for smooth feeding
Anti-tilt, self-lubricating follower for increased reliability
Long life USGI-spec stainless steel spring
Over-travel insertion stop on the spine
Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
Paint pen dot matrix panels on the bottom of the body to allow for identification marking
Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
Tweet |
Fits:
Ruger 10/22
Ruger 77/22
Ruger 96/22
Ruger SR-22
Ruger Charger Pistol
Ruger American Rimfire Rifle
Tweet |
Features and Specifications:
Manufacturer Number: 19637
Remington Factory Magazine
Caliber: Long Action Calibers
Capacity: 4 Rounds
Body Material: Steel
Spring Material: Steel
Follower Material: Steel
Baseplate Material: Polymer
Detachable Box Magazine
Finish: Blued
Fits:
Remington Model Six/76/760/7600 rifles in these calibers:
.25-06 Remington
.270 Winchester
.280 Remington
.30-06 Springfield
.35 Whelen
Tweet |
Tweet |
Tweet |
Features and Specifications:
Manufacturer Number: 90010
Ruger Mini-14 .223 Rem. Magazine 20 Rounds Steel Blued Finish
Caliber: .223 Remington and 5.56 NATO
Capacity: 20 Round
Body Material: Steel
Spring Material: Heat Treated Spring Wire
Follower Material: Polymer
Follower Color: Black
Color: Blued Finish
Fits:
Ruger Mini-14 rifle
Note:
This magazine will hold the bolt open when the last round is fired.
Tweet |
While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
FEATURES
True 10-round capacity that does not require limiters, pins, rivets, etc.
Next-generation impact and crush resistant polymer construction
Wide compatibility with non Colt-spec platforms
Anti-tilt follower and constant-curve internal geometry for increased reliability
Long life stainless steel spring
Over-travel insertion stop on the spine
Flared floorplate aids magazine handling and disassembly
Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
Tweet |
While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
Similar to the MOE PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.
In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.
Made in U.S.A.
FEATURES
- Next-generation impact and crush resistant polymer construction
- Modified dimensions allow for wider compatibility with non Colt-spec platforms
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- Long life USGI-spec stainless steel spring for parts commonality
- Over-travel insertion stop on the spine
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
- Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
Tweet |
Tweet |
With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload.
The unique drum configuration keeps the height of the magazine manageable as well as allowing for prone firing and easier storage. Features an easy-to-use loading lever, paint pen dot matrix for easy marking, and a rear window for instant capacity indication. Compatible with a wide range of NATO firearms such as the M4, M16, SCAR™ MK16/16S, HK®416, MR556, M27 IAR, IWI Tavor, and others.
FEATURES
- Next-generation impact and crush resistant polymer construction
- Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others
- Will seat fully loaded on a closed bolt
- Bolt hold open feature to lock the bolt back on the last round**
- Ratcheting Loading Lever to take tension off the spring for easy loading by hand
- Feed Tower compatible with most loading devices, including USGI stripper clips and guides, the StripLULA™, and others
- Designed to be left loaded for long term storage without any loss of function or degradation
- All components used are corrosion resistant
- Easy to disassemble for cleaning with only a flat-bladed screwdriver or similar
- Anti-glare translucent window on rear of drum allows for easy determination of rounds remaining
- Paint pen dot matrix panel on back of body to allow for identification marking
- Slip-on, semi-rigid Dust Cover prevents grit and debris intrusion during storage and transport
SPECIFICATIONS
- Weight, w/Dust Cover: 20.5 oz.
- Weight, loaded (M855 NATO): 46 oz.
- Length, max: 7.4 in.
- Width, max: 4.1 in.
*Optimized for use only with 5.56x45 NATO/.223 Remington cartridges. Use with other calibers such as .300 AAC Blackout is not recommended.
**The D-60 is designed to lock the bolt back after the last round for most AR15/M4/HK416 platforms. Inserting an empty magazine and manually cycling the charging handle will not activate the bolt hold open feature. In addition this feature may or may not work for weapons with bolt hold open levers that don't adhere to the Colt-spec.
Made in U.S.A.
Tweet |