Pistol Revolver Holsters
Hope to see you soon,
Fred Emerson III
Owner
This lightweight holster design lets you carry a variety of pistols and revolvers inside the pants for the utmost in comfort and concealment. It features a rugged clip and a special moisture barrier layer that keeps sweat out while cushioning you against any sharp edges. The BLACKHAWK! Inside-The-Pants Holster features an open top for fast access and is constructed of a four layer laminate with a rugged belt clip. The interior's smooth nylon lining allows for a quick and easy draw while the suede like outer shell anchors holster securely inside your pants. These holsters are right hand draw only but the belt clip allows for use with any standard width pants belt.
Fits:
AMT "Backup"
Bauer .22 and .25 caliber
Beretta 20, 21, 950, Bobcat, Jetfire , Minx and Tomcat
Colt Mustang, Mustang II, Mustang Pocketlite and Pony
KBI PSP 25
Jennings J-22 and J-25
Raven P-25
Taurus PT-22 and PT-25
Walther TPH
Specifications and features:
Blackhawk inside-the-pants holster
Fits .22 & .25 caliber small-frame semi-automatic handguns
Right hand
Open top
4-layer laminate
Suede-like outer shell
Moisture-barrier layer
Standard belt clip
Black
Tweet |
• SERPA® Auto Lock™ release
• Passive retention detent adjustment screw
• Speed-cut design for rapid draw, target acquisition and re-holster
• Includes Belt Loop Platform and Paddle Platform
• Fits Shoulder, S.T.R.I.K.E., Quick Disconnect and Tactical Holster Platforms
* Left Handed Holster
Tweet |
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
THE MD-3 STICKY HOLSTER FITS THE FOLLOWING GUN MODELS
Model Name | Caliber | Barrel |
Beretta Cheetah | 380ACP | 3.82 |
Browning 1911-380 Black Label Compact | 380ACP | 3.62 |
Browning BDA | 380ACP | 3.8 |
Colt Goverment MK-IV Model 80 | 380ACP | 3.25 |
CZ-USA 82 | 9mm/380ACP | 3.8 |
Remington R51 | 9mm | 3.4 |
Sig Sauer P232 | 380ACP | 3.6 |
Walther PPKS | ALL | 3.35 |
Walther PPK | ALL | 3.3 |
Interarms EPK | 380ACP | 3.35 |
Star, S.A. Firestar Plus | 9MM | |
Sterling Arms Mark II | 380ACP | 3.5 |
Bersa Thunder 380 | 380ACP | 3.5 |
Bersa Thunder 380 CC | 380ACP | 3.2 |
Bersa Thunder 380 Plus | 380ACP | 3.5 |
Bersa Firestorm .380 | 380ACP | 3.5 |
Bersa Firestorm .22 LR | 22LR | 3.5 |
Browning BDA 380 | 380ACP | 3.8 |
Norinco Model 59 (Macarov) | 9x18mm | |
Simson Suhl V series Macarov 9x18 | 9x18mm | |
Miltex Makarov Special Edition | 9x18mm | |
CZ-USA 82 | ALL | |
Colt Government MK-lV Model 80 | 380ACP | 3.25 |
Sig Sauer P230 | ALL | 3.6 |
Kahr P9 | 9mm | 3.6 |
Kahr CW 9 | 9mm | 3.5 |
Tweet |
Bulldog® Extreme – Pistol Holster Belt Loop & Clip (AMBI)
Durable Nylon Water-Resistant Outer Shell & Top Grade Fused Padding Provide The Ultimate In Fit, Comfort & Protection For You & Your Pistol
– Ambidextrous Belt Loop & Metal Clip
– Soft, Scratch Resistant Inner Lining
– Spine Protector Keeps Gun Sights From Tearing The Inner Lining
Tweet |
Fits:
Ruger
LC9, 3.12 Inch
LC9S, 3.12 Inch
LC9s Pro, 3.12 Inch
Glock
42
Tweet |
The 578 also features the GLS™, an innovative technology that automatically secures the weapon when holstered and releases it upon application of the middle finger with a standard shooting grip for a more intuitive and safer release.
The holster body is constructed with SafariSeven™, a lightweight, state-of-the-art nylon blend is completely non-abrasive to a gun’s finish, tolerant of extreme high and low temperatures, and easy to maintain. This holster includes an injection-molded paddle and an injection-molded belt loop that is adjustable for maximum comfort and allows the holster to be worn cross draw.
Two new sizes, Wide Standard and Wide Long to fit the most popular Beretta, Sig Sauer and Springfield Armory firearms. The Pro-Fit now accommodates over 225 pistols with a simple adjustment.
FITS:
ATI 1911'S
BERETTA 90-TWO
BERETTA 92
BERETTA 92 CENTURION
BERETTA 92 VERTEC
BERETTA 92A1
BERETTA 92A3
BERETTA 92F, FS (M9)
BERETTA 92S
BERETTA 96
BERETTA 96A1
COLT 1911'S
CZ 75
ED BROWN 1911'S
FN FIVE-SEVEN
FNS 40 LS
FNS 9 LS
GLOCK 17L
GLOCK 34
GLOCK 35
GLOCK 41
GRAND POWER X-CALIBER
KIMBER 1911'S
LES BAER 1911'S
NIGHTHAWK 1911'S
PARA ORDNANCE 1911'S
REMINGTON 1911'S
ROCK ISLAND ARMORY 1911'S
ROCK RIVER ARMS 1911'S
RUGER 1911'S
S&W 1911'S
S&W M&P 9L, 40L
S&W M&P 9L, 40L C.O.R.E.
SARSILMAZ SAR-K2-45 SIG SAUER 1911'S
SPRINGFIELD 1911'S
STI 1911'S
TANFOGLIO 1911'S
TAURUS 1911'S
WALTHER PPQ 5" 9mm, .40
WALTHER PPQ M2 5" 9mm, .40
WILSON COMBAT 1911'S
Tweet |
Tweet |
This lightweight holster design lets you carry a variety of pistols and revolvers inside the pants for the utmost in comfort and concealment. It features a rugged clip and a special moisture barrier layer that keeps sweat out while cushioning you against any sharp edges. The BLACKHAWK! Inside-The-Pants Holster features an open top for fast access and is constructed of a four layer laminate with a rugged belt clip. The interior's smooth nylon lining allows for a quick and easy draw while the suede like outer shell anchors holster securely inside your pants. These holsters are right hand draw only but the belt clip allows for use with any standard width pants belt.
Fits:
AMT "Backup"
Bauer .22 and .25 caliber
Beretta 20, 21, 950, Bobcat, Jetfire , Minx and Tomcat
Colt Mustang, Mustang II, Mustang Pocketlite and Pony
KBI PSP 25
Jennings J-22 and J-25
Raven P-25
Taurus PT-22 and PT-25
Walther TPH
Specifications and features:
Blackhawk inside-the-pants holster
Size 04
Fits .22 and .25 caliber small autos
Left hand
Suede-like outer shell
Moisture-barrier layer
Open top
4-layer laminate
Nylon lining
Belt clip
Black
Tweet |
• SERPA® Auto Lock™ release
• Passive retention detent adjustment screw
• Speed-cut design for rapid draw, target acquisition and re-holster
• Includes Belt Loop Platform and Paddle Platform
• Fits Shoulder, S.T.R.I.K.E., Quick Disconnect and Tactical Holster Platforms
Tweet |
If you have a front rail mounted laser choose our MD-4 modified for laser holster.
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
THE MD-4 STICKY HOLSTER FITS THE FOLLOWING GUNS
Model Name | Caliber | Barrel |
Bersa Thunder 9 UC | 9MM | 3.25 |
Bersa Thunder Pro 40 UC | 40 S&W | 3.25 |
Bersa Thunder Pro 45 UC | 45 S&W | 3.6 |
Bersa Thunder Pro 9 UC | 9mm | 3.25 |
Walther PPS | All | 3.2 |
Kahr CW 45 | 45ACP | 3.6 |
Kahr CW 40 | 40S&W | 3.6 |
Kahr CW 9 | 9MM | 3.6 |
Kahr P9 | 9mm | 3.6 |
Glock 43 | 9mm | 3.39 |
Sig Sauer P239 | 9mm,.357 SIG, 40 S&W | 3.6 |
Smith and Wesson Shield | 9mm, 40 cal | 3.1 |
Smith and Wesson Shield | 45 ACP | 3.3 |
Springfield Armory EMP | ||
Springfiel Armory XD-S | 9mm, 40 cal, 45ACP | 3.3 |
Springfield XDS 3.3 |
||
Walther CCP | ALL | |
Walther PK380 | 380ACP | |
Walther P22 (3.42 in barrel) | 22LR | |
Walther PPS M2 | 9mm | 3.18 |
Tweet |
Bulldog® Extreme – Pistol Holster Belt Loop & Clip (AMBI)
Durable Nylon Water-Resistant Outer Shell & Top Grade Fused Padding Provide The Ultimate In Fit, Comfort & Protection For You & Your Pistol
– Ambidextrous Belt Loop & Metal Clip
– Soft, Scratch Resistant Inner Lining
– Spine Protector Keeps Gun Sights From Tearing The Inner Lining
Tweet |
Tweet |
Tweet |
This lightweight holster design lets you carry a variety of pistols and revolvers inside the pants for the utmost in comfort and concealment. It features a rugged clip and a special moisture barrier layer that keeps sweat out while cushioning you against any sharp edges. The BLACKHAWK! Inside-The-Pants Holster features an open top for fast access and is constructed of a four layer laminate with a rugged belt clip. The interior's smooth nylon lining allows for a quick and easy draw while the suede like outer shell anchors holster securely inside your pants. These holsters are right hand draw only but the belt clip allows for use with any standard width pants belt.
Fits:
GLOCK 26, 27, 33 and 28
Kahr, K9, P9 and K40
Kel-Tec P-11, P-32 and P-40
Taurus PT-111, PT-138, PT-140, PT-145 and PT-157
Specifications and features:
Blackhawk inside-the-pants holster
Right hand
Open top
4-layer laminate
Suede-like outer shell
Moisture-barrier layer
Standard belt clip
Black
Tweet |
Tweet |
• SERPA® Auto Lock™ release
• Passive retention detent adjustment screw
• Speed-cut design for rapid draw, target acquisition and re-holster
• Includes Belt Loop Platform and Paddle Platform
• Fits Shoulder, S.T.R.I.K.E., Quick Disconnect and Tactical Holster Platforms
* Left Handed Holster
Tweet |
If you have a front rail mounted laser choose our MD-4 modified for laser holster.
Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
THE MD-4 MODIFIED STICKY HOLSTER FITS THE FOLLOWING GUNS
Model Name | Caliber | Barrel |
Bersa Thunder 9 UC | 9MM | 3.25 |
Bersa Thunder Pro 40 UC | 40 S&W | 3.25 |
Bersa Thunder Pro 45 UC | 45 S&W | 3.6 |
Bersa Thunder Pro 9 UC | 9mm | 3.25 |
Walther PPS | All | 3.2 |
Kahr CW 45 | 45ACP | 3.6 |
Kahr CW 40 | 40S&W | 3.6 |
Kahr CW 9 | 9MM | 3.6 |
Kahr P9 | 9mm | 3.6 |
Glock 43 | 9mm | 3.39 |
Sig Sauer P239 | 9mm,.357 SIG, 40 S&W | 3.6 |
Smith and Wesson Shield | 9mm, 40 cal | 3.1 |
Smith and Wesson Shield | 45 ACP | 3.3 |
Springfield Armory EMP | ||
Springfiel Armory XD-S | 9mm, 40 cal, 45ACP | 3.3 |
Springfield XDS 3.3 |
||
Walther CCP | ALL | |
Walther PK380 | 380ACP | |
Walther P22 (3.42 in barrel) | 22LR | |
Walther PPS M2 | 9mm | 3.18 |
Tweet |
Bulldog® Extreme – Pistol Holster Belt Loop & Clip (AMBI)
Durable Nylon Water-Resistant Outer Shell & Top Grade Fused Padding Provide The Ultimate In Fit, Comfort & Protection For You & Your Pistol
– Ambidextrous Belt Loop & Metal Clip
– Soft, Scratch Resistant Inner Lining
– Spine Protector Keeps Gun Sights From Tearing The Inner Lining
Tweet |