AR Accessories & Parts
Hope to see you soon,
Fred Emerson III
Owner
Specifications and Features:
GrovTec GTSW-228
Converts Keymod to Picatinny
3" Length
7 Slot
Aluminum
Tweet |
Specifications and Features:
GrovTec GTSW-237
Converts M-LOK to Picatinny
3" Length
7 Slot
Aluminum
Tweet |
Specifications and Features:
GrovTec GTSW-229
Converts KeyMod to Picatinny
3.8" Length
9 Slot
Aluminum
Tweet |
Specifications and Features:
GrovTec GTSW-238
Converts M-LOK to Picatinny
3.8" Length
9 Slot
Aluminum
Tweet |
Specifications and Features:
GrovTec GTSW-230
Converts KeyMod to Picatinny
6" Length
15 Slot
Aluminum
Tweet |
Specifications and Features:
GrovTec GTSW-239
Converts M-LOK to Picatinny
6" Length
15 Slot
Aluminum
Tweet |
MODEL:Mark 2 Mount
TYPE:Accessory-Rings/Mounts/Bases
FINISH:Matte Black
ADDL INFO:Fits 1" Scope Tubes
Tweet |
The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes.
Made in U.S.A.
FEATURES
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
- Supplemental friction lock minimizes accuracy robbing wobble*
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Replaceable 0.55" Extended Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments
- Sling Mounts
- Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil Spec CTR
SPECIFICATIONS**
CTR Carbine Stock, Commercial-Spec
- Weight: 9.3 oz.
- Weight, w/receiver extension: 13.6 oz.
- Length, max: 7.2 in.
- LOP Adjustment Range: 3.8 in.
- LOP, M4 Collapsed: ~10.8 in.
- LOP, M4 Extended: ~14.6 in.
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes.
Made in U.S.A.
FEATURES
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, and others (please see the note below)
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Replaceable 0.55" Extended Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec MOE
SPECIFICATIONS*
MOE Carbine Stock, Commercial-Spec
- Weight: 8.5 oz.
- Weight, w/receiver extension: 13.8 oz.
- Length, max: 7.2 in.
- LOP Adjustment Range: 3.8 in.
- LOP, M4 Collapsed: ~10.8 in.
- LOP, M4 Extended: ~14.6 in.
* Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
Features
- Manufactured from heat treated steel
- Rubberized Grip
- Manganese Phosphate Finish
- Mil-Spec Castle Nut Wrench
- Standard Length Receiver Extension Removal Wrench
- A1/A2 Flash Suppressor Wrench
- Beverage Opener
Precision machined from heat treated steel, the TAPCO multifunction tool is a necessity for any AR enthusiast. This tool includes a Mil-Spec castle nut wrench, a standard length receiver extension removal wrench, an A1/A2 Flash Suppressor wrench, and a beverage opener. Offering an improved grip, each tool has a rubberized grip for both safety and comfort. Every tool is coated in manganese phosphate for reduced visibility and corrosion resistance. Made in the USA and features a lifetime warranty.
Tweet |
• Proudly Made in USA
• Polymer Stock Made from Impact Resistant High-strength Material
• Mil-spec Diameter Extension Tube Made from Aircraft Aluminum with Rolled Threads, FDE Cerakote® Applied for Best Corrosion and Wear Resistance
• Built for Heavy-duty Operations with Tightest Tolerance Control
• Stock Assembly Complete with Action Spring, Buffer Assembly, Tear-drop Ring and Castle Nut
Tweet |
Threaded 1/2"-28. Includes crush washer.
Tweet |
Manufactured from high quality steel and finished with a mil. spec. phosphate coating.
Length: 0.95"
Bore diameter of .750 inches.
Made in the U.S.A.
Tweet |
Made from high quality steel and finished with a Mil. Spec. phosphate coating.
Made in the U.S.A.
Tweet |