AR Accessories & Parts
Hope to see you soon,
Fred Emerson III
Owner
Genuine Ruger® Factory Accessory
Tweet |
Made in U.S.A.
FEATURES
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard A2 irons
- Protective wings shield the dual, same plane flip apertures
- Sight can still be folded with either large or small aperture in position
- Detent knob easily and positively adjusts windage
Specs
Tweet |
• Quick Detachable Front Sight with Adjustable A2 Square Post Assembly to Fit All Picatinny/Weaver Style Rails
• Equipped with Locking Retention Thumb Nut andClever and Robust Flip-up Posi-lock Design to Guarantee Zero in the Most Extreme Combat Condition
• Precision Elevation Adjustments to Enhance Shooting Accuracy
• Profile Designed for Installation on Gas Block
Tweet |
• Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
• Friendly Hex Screws with Retention Features and Full Length Locking Plate to Guarantee Easy Installationand Secure Fit
• Fits All Picatinny/Weaver Rails
Tweet |
Tweet |
Tweet |
• Quick Detachable Low Profile Front Sight Tower
• Robust Posi-lock Design for Repeatable Flip-up/Fold-down Operations
• A2 Square Post Assembly for Precision Elevation Adjustment to Enhance Shooting Accuracy
• Tactical Low Profile with Precise Height to Work with Handguard Rail or High Profile Gas Block
Tweet |
* 34mm model features 20 MOA elevation built in.
Technical Information:
Height A (from rail to bottom of scope ring):
1" = 1.0"
30mm = 1.0"
34mm = 0.68"
Width B (rings):
1" = 1.57"
30mm = 1.75"
34mm = 1.90"
Height C (from rail to middle of scope rings):
1" = 1.5"
30mm = 1.6"
34mm = 1.35"
Length D (front of front ring to back or rear ring):
1" = 4.15"
30mm = 4.15"
34mm = 4.92"
Length E (between rings):
1" = 2.15"
30mm = 2.15"
34mm = 2.9"
Tweet |
• Integral Picatinny Mounting Deck to Fit All Flat Tops
• Complete with Dual Aiming Apertures and Precision Windage Adjustment
• Clever and Robust Flip-up Posi-lock Design to Guarantee Zero in the Most Extreme Combat Conditions
• User Friendly Locking Thumb Nut for Easy Installation
Tweet |
The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order the Commercial-Spec MOE
SPECIFICATIONS*
MOE Carbine Stock, Mil-Spec
- Weight: 8.0 oz.
- Weight, w/receiver extension: 12.0 oz.
- Length, max: 6.9 in.
- LOP Adjustment Range: 3.3 in.
- LOP, M4 Collapsed: ~10.5 in.
- LOP, M4 Extended: ~13.8 in.
* Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
Threaded 1/2"-28. Includes washer.
Tweet |
Features and Specifications:
Manufacturer Number: 93384
Bushmaster AR-15 Lower Parts Kit Mil Spec Black
Includes everything necessary to completely build up lower receiver
Packaged in clampack
Made In The USA
Color: Black
Fits:
Mil-Spec AR-15 Lower Receiver
Tweet |
A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
- Two water-resistant battery storage tubes located on the left and right sides of the stock
- Each tube will store up to two (2) CR123A lithium or AA batteries
- Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
- Supplemental friction lock minimizes accuracy robbing wobble*
- Premium chrome-silicon lock spring provides positive locking and long service life
- Sloping cheek weld provides a wide contact surface for user comfort
- Shielded release latch prevents snagging and accidental operation
- Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
- Rear/Bottom – 1.25" sling loops
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial-Spec STR
Tweet |
Tweet |
A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
- Two water-resistant battery storage tubes located on the left and right sides of the stock
- Each tube will store up to two (2) CR123A lithium or AA batteries
- Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
- Supplemental friction lock minimizes accuracy robbing wobble*
- Premium chrome-silicon lock spring provides positive locking and long service life
- Sloping cheek weld provides a wide contact surface for user comfort
- Shielded release latch prevents snagging and accidental operation
- Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
- Rear/Bottom – 1.25" sling loops
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec STR
SPECIFICATIONS**
STR Carbine Stock, Commercial-Spec
- Weight: 12.3 oz.
- Weight, w/receiver extension: 16.3 oz.
- Length, max: 7.3 in.
- Width, max: 2.6 in.
- LOP Adjustment Range: 3.8 in.
- LOP, M4 Collapsed: ~10.9 in.
- LOP, M4 Extended: ~14.7 in.
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
Features and Specifications:
Manufacturer Number:55CA6C5
AR-15 Complete Lower Parts Kit
Finish: Black
Includes:
Pistol Grip
Fire Controls And Pins
Standard Trigger
Fits: AR-15 Lower Receivers
Tweet |
Specifications and Features:
GrovTec GTSW-227
Converts Keymod to Picatinny
2.2" Length
5 Slot
Aluminum
Tweet |
Specifications and Features:
GrovTec GTSW-236
Converts M-LOK to Picatinny
2.2" Length
5 Slot
Aluminum
Tweet |